User manual HUSQVARNA 650 CRT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 650 CRT. We hope that this HUSQVARNA 650 CRT user guide will be useful to you.


HUSQVARNA 650 CRT : Download the complete user guide (921 Ko)

Manual abstract: user guide HUSQVARNA 650 CRT

Detailed instructions for use are in the User's Guide.

[. . . ] 650CRT Owner's Manual SAFETY RULES Safe Operation Practices for Walk-Behind Powered Rotary Tillers TRAINING • Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Never allow adults to operate the equipment without proper instruction. Keep the area of operation clear of all persons, particularly small children, and pets. [. . . ] • If shear pin(s) break, replace only with those shown in the Repair Parts section of this manual. • 10 MAINTENANCE US RS RS OU 0H Y5 ER YS EA S MAINTENANCE SCHEDULE EA RE E UR OU CH HO FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Check Engine Oil Level Change Engine Oil Oil Pivot Points Inspect Spark Arrester / Muffler Inspect Air Screen Clean or Replace Air Cleaner Cartridge Clean Engine Cylinder Fins Replace Spark Plug RH Gear Case Grease Fitting (1oz. ) Y5 FO ER ER Y2 ER 5H SO N BE EV EV 1, 2 2 1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions. EV EV SERVICE DATES GENERAL RECOMMENDATIONS The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain tiller as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your tiller. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season. • Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer. LUBRICATION CHART THROTTLE CONTROL ENGINE RH GEAR CASE GREASE FITTIG DEPTH STAKE PIN BEFORE EACH USE • • • Check engine oil level. Check for loose fasteners. IDLER BRACKET WHEEL HUB LEVELING SHIELD HINGES LUBRICATION Keep unit well lubricated (See “LUBRICATION CHART”). SAE 30 OR 10W-30 MOTOR OIL REFER TO MAINTENANCE “ENGINE” SECTION EP #1 GREASE 11 MAINTENANCE Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine. Do not touch hot muffler or cylinder fins as contact may cause burns. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil’s SAE viscosity grade according to your expected temperature. SAE VISCOSITY GRADES SAE 30 10W-30 / 5W-30 F C -30 -20 -20 0 -10 30 40 4 10 60 20 80 30 100 40 OIL DRAIN PLUG OIL LEVEL OIL FILLER PLUG TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE oil_visc_chart5_e(drt) FIG. 16 NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc. ) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 40°F (4°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. • Use a funnel to prevent oil spill on tiller, and catch oil in a suitable container. • After oil has drained completely, replace oil drain plug and tighten securely. See “CHECK ENGINE OIL LEVEL” in the Operation section of this manual. AIR FILTER (See Fig. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first. TO SERVICE PRE-CLEANER • Remove foam pre-cleaner from air cleaner cover. TO SERVICE CARTRIDGE • Carefully remove cartridge to prevent debris from entering carburetor. • Reinstall cartridge, cover with pre-cleaner and secure with screw. IMPORTANT: PETROLEUM SOLVENTS, SUCH AS KEROSENE, ARE NOT TO BE USED TO CLEAN THE CARTRIDGE. [. . . ] Pin, Stake, Depth Ring, Klip Bolt, Rdhd Sqnk 5/16-18 x 3/4 Spring Bracket, Latch Spring, Depth Stake Shield, Tine Bolt, Carriage 5/16-18 UNC x 1 Nut, Hex 5/16-18 Washer, Lock 5/16 Bolt, Carriage 5/16-18 x 1-1/4 Bracket, Shield Tine Shield, Side, Outer R. H. Nut, Hex Flange 1/4-20 UNC Bolt, Carriage 1/4-20 x 1-1/4 Gr. KEY NO. DESCRIPTION 532 10 27--01 Grip 873 22 06-00 Nut, Hex 3/8-16 532 10 21-56 Stake, Depth 874 93 06-32 Bolt, Hex 3/8-16 x 2 532 00 44-40 Hinge 872 14 04-04 Bolt, Carriage 1/4-20 x 1/2 Gr. 5 532 12 47-17 Cap, Vinyl 532 10 92-27 Pad, Idler 532 12 50-16 Shield, Leveling 532 12 05-88 Pin, Hinge 532 14 22-93 Shield, Side 873 97 05-00 Locknut, Flange 5/16-18 873 22 04-00 Nut Fin Hex 1/4-20 UNC 810 04 04-00 Washer Lock Hvy Helical 1/4 NOTE: All component dimensions given in U. S. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 650 CRT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 650 CRT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.