User manual HUSQVARNA 960430005

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 960430005. We hope that this HUSQVARNA 960430005 user guide will be useful to you.


HUSQVARNA 960430005 : Download the complete user guide (3719 Ko)

Manual abstract: user guide HUSQVARNA 960430005

Detailed instructions for use are in the User's Guide.

[. . . ] 03002 917. 279240 (YTH20F42T) Owner's Manual SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. WARNING: Do not coast down a hill in neutral, you may lose control of the tractor. WARNING: Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. [. . . ] • The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. CHECK OPERATOR PRESENCE SYSTEM • When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine. • When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine. • The attachment clutch should never operate unless the operator is in the seat. ROS "ON" Position Engine "ON" Position (Normal Operating) BLADE REMOVAL (See Fig. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. • Install new blade with stamped "GRASS SIDE" facing the ground. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly. IMPORTANT: Special blade bolt is heat treated. BLADE CENTER HOLE BLADE BOLT (SPECIAL) MANDREL ASSEMBLY • 02 54 4 STAR FIG. 13 BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. NOTE: The original equipment battery on your tractor is maintenance free. TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to “leak” power. • Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor. 02828 CHECK REVERSE OPERATION (ROS) SYSTEM • When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should shut off the engine. • When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to shift into reverse should NOT shut off the engine. 15 MAINTENANCE • • • • Rinse the battery with plain water and dry. Reinstall battery (See “REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this manual). • Remove yellow cap from end of drain valve and install the drain tube onto the fitting. • Unlock drain valve by pushing inward and turning counterclockwise. OIL DRAIN VALVE V-BELTS Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. Replace belts if they begin to slip from wear. TRANSAXLE COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle. • Inspect cooling fan to be sure fan blades are intact and clean. • Inspect cooling fins for dirt, grass clippings and other materials. [. . . ] 960 43 00-05 KOHLER ENGINE - MODEL NUMBER SV600-0002 STARTING SYSTEM 2 1 OIL PAN/LUBRICATION 1 15 14 13 2 3 4 5 6 ENGINE CONTROLS 12 8 7 9 14 10 15 9 13 12 11 8 7 1 11 10 16 17 2 18 6 3 4 5 47 TRACTOR - MODEL NO. 960 43 00-05 KOHLER ENGINE - MODEL NUMBER SV600-0002 CRANKSHAFT EXHAUST 3 1 2 1 FUEL SYSTEM 11 12 13 15 14 14 14 14 14 16 1 17 2 3 4 16 14 6 10 7 5 8 9 48 TRACTOR - MODEL NO. 960 43 00-05 KOHLER ENGINE - MODEL NUMBER SV600-0002 HEAD/VALVE/BREATHER KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 IGNITION/ELECTRICAL KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 2009607-s 20 041 13-s M-645020-s 2032601-s 20 599 02-s 2008604-s 2018601-s 2008603-s 2014603-s 2006201-s 2017301-s 2008903-s 2008602-s 1246805-s 2031805-s 2001601-s 2001701-s 20 841 01-s 1 1 7 1 2 2 2 2 2 2 2 2 6 1 1 1 1 1 DESCRIPTION Kit, Valve Cover (Includes 2) Gasket, Valve Cover Screw, Flg Thd Frm M6x1. 0x20 Hose, Breather Pivot, Rocker Arm (Includes 6) Screw, Set Arm, Rocker Stud, Rocker Plate, Push Rod Guide Lock, Retainer Cap, Valve Spring Spring, Valve Screw, Flg M1 Ox1. 5x80 Washer, Flat 13/32” Cylinder Head Assembly Valve, Exhaust Valve, Intake Kit, Cylinder Head Gasket (Includes 2, 13, 14) 19 20 411 04-s 2 Rod, Push PART NO. 2016202-s 1208614-s 1246803-s 2014604-s 2015701-s X-42-15-s 2002505-s 2008617-s 2015403-s 237878-s 236602-s M-545020-s 41 40309-s 1213202-s 231285-s 2058401-s M-561025-s 2017601-s 1 1 1 1 1 1 1 2 1 1 1 2 1 1 2 1 2 1 DESCRIPTION Screen, Grass Screw, Flg M1. 0x1. 5x45 Washer, Flat 13/32” Plate, Fan Mounting Fan Key, 3/16” X 5/8” Flywheel Screw, Skt Thd Frm M5x0. 8x25 Clip, Stator Wire Kit, 15 Amp Stator Connector (3 Contact) Screw, Flg Thd Frm M5xo. 8x20 Rectifier-regulator Plug, Spark Clip, Cable Module, Ignition Screw, Skt Thd Frm M5x0. 8x25 Harness, Wiring - Six Pin NOT ILLUSTRATED BLOWER HOUSING & BAFFLES CRANKCASE KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PART NO. -- -- -2513957-s 2003201-s 2006704-s 2087401-s 2010801-s 2001804-s 2012302-s 2075504-s 2038016-s 2042302-s 1215405-s M-631015-s X-25-102-s 2014402-s 2039302-s 2011202-s 2008613-s 2014406-s 2046801-s 2009001-s 2008606-s 2001004-s 2008906-s 2004416-s 2046803-s 2001004-s 2046803-s 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 2 2 1 1 2 2 1 1 1 1 2 1 DESCRIPTION Crankcase (Use: Short Block) Plug, Sq Hd Pipe 3/8” Seal, Oil Rod, Connecting Kit, Piston W/ring Set (94mm) (Includes 6, 7) Ring Set (94 Mm) Retainer, Piston Pin Tube, Drainback Kit, Balance Weight (Includes 10, 11) Kit, locating Pin Shoe, Guide Clip, Hitch Pin Washer, Flat 6 mm Washer, Flat 1/4” Shaft, Governor Cross Kit, Oil Pump Assembly (Includes 17, 18) Spacer, Oil Pump Screw Screw, Oil Pump Kit, Camshaft CenterExhaust Assembly (Includes 20) Washer, Thrust Kit, Cam Lever Assembly (Includes 23) Screw, Shd Thd FRM M6x1x26 Kit, Camshaft Assembly (Includes 24-26) Spring, ACR Weight, ACR Washer, Thrust -ACR Kit, Camshaft Assembly (Includes 28) Washer, Thrust -ACR KEY NO. 1 2 PART NO. 2002707-s 2008606-s 1 4 DESCRIPTION Kit, Blower Housing Screw, Shd Thd Frm M6x1x26 AIR INTAKE/FILTRATION KEY NO. 1 2 3 4 5 6 PART NO. 2009604-s 25 341 04-s 2008302-s 2009401-s 12 041 02-s M-641060-s 1 2 1 1 1 1 DESCRIPTION Kit, Air Cleaner Cover (Includes 2) Knob, Cover Element, Air Cleaner Kit, Air Cleaner Base (Includes 5, 6) Gasket, Air Cleaner Base Nut, Flg M6x1. 0 Note: All Component Dimensions Given In U. s. Inches 1 Inch = 25. 4 Mm Note: All Component Dimensions Given In U. s. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 960430005




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 960430005 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.