User manual HUSQVARNA 966004001

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 966004001. We hope that this HUSQVARNA 966004001 user guide will be useful to you.


HUSQVARNA 966004001 : Download the complete user guide (1618 Ko)

Manual abstract: user guide HUSQVARNA 966004001

Detailed instructions for use are in the User's Guide.

[. . . ] We recommend a wide vision safety mask for over the spectacles or standard safety glasses. SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS DANGER ! THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION • • • Read, understand and follow all instructions in the manual and on the machine before starting. Only allow responsible adults, who are familiar with the instructions, to operate the machine. Clear the area of objects such as rocks, stones, toys, wire etc. , which could be picked up and thrown by the blades. [. . . ] Be sure all parts are there. 9 CONTAINER CONTENTS 2 - Soft bag containers 1 - Upper Chute 1 - Cover Assembly 1 - Weight 1 - Bag of Hardware 1 - Lower Chute 1 - Mounting Hardware TOOLS REQUIRED ½" Wrench (2) 7 /16" Wrench (2) Drill 9 /16" Socket and Ratchet Standard Screwdriver /16" Wrench (2) Ft/Lbs Torque Wrench ¼" and 5/16" Drill Bits PARTS IDENTIFICATION UPPER CHUTE COVER ASSEMBLY LOWER CHUTE BAG CONTAINERS NOTE: When right hand (RH) and left hand (LH. are mentioned in this manual, it means when you are seated on the mower in the operator’s position. CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER: • • • • • Set parking brake. Disconnect spark plug and place wire where it cannot come in contact with plug. 7 ASSEMBLY 1 INSTALL PLATE AND HANGER 2 MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY 1. Using hardware provided in kit, attach support mount to unit. Do not fully tighten nuts at this time. For ease of assembly, you may wish assistance from another person for mounting the cover assembly to mower. 2. Lift and rotate cover to align the frame bracket with the hanger and slide the cover down until secure. Cover Assembly Support Mount Hanger Bracket 3. Secure rear end of support straps to outside of hanger assembly. Set reinforcement plates to the outside of the tank brackets and fasten front end of support strap to tank bracket and reinforcment plate with round head bolt. Secure front end of reinforcement plate to tank bracket with hex bolt. NOTE: Depending on model, rear guard hole may need to be drilled out to 5/16" if kit hardware is too large. Hex Bolt Placement Round Head Bolt Placement Frame Bracket Hanger 3 INSTALLING SPACER PLUG Remove plastic end cap from the center bag support arm. It may be necessary to tap the spacer into place with a hammer or mallet. The additional extension will hold the hood more securely when latched. Reinforcement Plate Remove center Insert spacer and replace cap end cap Support Straps 8 ASSEMBLY 4 CONTAINER INSTALLATION 5 LOWER CHUTE INSTALLATION 1. Install containers on support frame, overlapping containers at center tube. Note: One container should always overlap the other container at the center tube. Latch Handle 1. Raise and hold deflector shield in upright position. 3. Align the bracket slot on lower chute with the deflector bracket tab on the mower deck. 4. With the lower chute in proper position, hold the chute securely while hooking the front latch to the mower deck. • Select a speed low enough to give good mower cutting performance, good quality cut and good bagging performance. NOTE: It may be necessary to overlap width of cut to suit your conditions. • Plastic trash bags (3. 0 mil, 30 gallon) can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full: a. Disengage blades, shift into neutral, engage the parking brake and stop the engine. c. Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails. d. With the container resting on the ground, close and secure the top of the plastic lawn bag. [. . . ] Product should be delivered, at owners expense, as is, to an authorized Husqvarna Servicing Retailer for evaluation. Proof of purchase, as explained in section 6, rests solely with the customer. It is the Owner s and Retailer s responsibility to make certain that the Warranty Registration Card is properly filled out and mailed to Husqvarna. This card should be mailed within ten (10) days from the date of purchase in order to confirm the warranty and to facilitate post-sale service. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 966004001




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 966004001 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.