User manual HUSQVARNA MASTER GARDEN S

[. . . ] L Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running. Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed. Never lift the rear of the mower while starting the engine or during normal operation. [. . . ] Once the machine has been set up properly, start the engine as follows: a)Operate the engine stop lever (12) to prepare the engine for start. B)Engines with choke system: when the engine is cold, position the accelerator lever (11) on START Engines with primer system: Press the fuel-enrichment pump (26) located on the carburettor 3 or 4 times. MANUAL STARTING: lHold the engine start-grip (10) and pull the starter rope gently until you feel the resistance caused by compression. To cut the grass, push the lawn mower manually How to insert automatic advance: Lift up the clutch handle (14) and keep it pressed in position. To cut the grass, push the lawn mower manually or insert the automatic advance gear. Periodically check the automatic advance assembly and make sure to keep it clean. In particular, the pinion (16) and the gear (17) must be kept perfectly clean. To carry out this check, you must remove the wheel (18) by unscrewing the screw (19). Periodically check the automatic advance assembly and make sure to keep it clean. In particular, the pinion (17) and the gear (18) must be kept perfectly clean. M) Never lift the rear of the mower while starting the engine or during normal operation. N) If the blade happens to hit any obstacle, stop the engine at once and remove the spark plug cap. A)Make sure that all nuts, bolts, and screws are kept well tightened to keep the mower in a safe operating condition. B)Never leave the machine with fuel in the tank within an enclosed area where the fuel vapours could reach naked flames or sparks. D)Keep the engine, silencer, battery compartment and petrol tank free from grass, leaves and excess lubricant, in order to reduce the danger of fire. E)Frequently check the grass catcher for wear or deterioration f)For safety reasons, be sure to replace worn-out or damaged parts in due time. G)If the fuel tank has to be drained, it is essential that this be done outdoor. H)Assemble the blades following the corresponding instructions and use only blades bearing the maker's name or the trademark of the manufacturer or supplier and marked with the reference number. I)To protect hands during disassembly or assembly of the blades, it is absolutely essential to wear suitable protective gloves. A)When mowing, wear strong footwear (boots or heavy shoes) and long trousers. [. . . ] A)When mowing, wear strong footwear (boots or heavy shoes) and long trousers. B)Before you start mowing, make sure that the blade and blade fixing screw are securely fastened. C)Turn off the engine, wait until the blade has stopped and remove the spark plug cap before: l transporting, lifting or moving the machine away from the working area; l carrying out maintenance or cleaning, or when carrying out any operation on the blade; l adjusting the cutting height; l leaving the machine unattended. Switch off the motor and disconnect the spark plug before undertaking any maintenance work. [. . . ]