User manual HUSQVARNA MZ ZTR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA MZ ZTR. We hope that this HUSQVARNA MZ ZTR user guide will be useful to you.


HUSQVARNA MZ ZTR : Download the complete user guide (5389 Ko)

Manual abstract: user guide HUSQVARNA MZ ZTR

Detailed instructions for use are in the User's Guide.

[. . . ] MZ5225 / 968999717 MZ7227 / 968999719 MZ6125BF / 968999721 MZ6125C / 968999749 Operator's Manual MZ6125 / 968999718 MZ5225BF / 968999720 MZ5225C / 968999748 MZ25 / 968999780 Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. English ©2008 HTC. Printed in U. S. A. Contents INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine. 2. Move the steering controls to the neutral position (N). Released parking brake 8061-010 3. Select the cutting height by setting the cutting height pin into the desired hole. 4. Make sure the work area is free from objects that could be thrown by the rotating blades. WARNING!Ensure that no one is near mower when engaging blade switch. Cut height selection 8061-011 5. Engage the mower deck by pulling out the blade switch. 7. The machine’s speed and direction are continuously variable using the two steering controls. When both controls are in the neutral position, the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively. In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of Engage the mower deck and move throttle to full. 8061-002 English-31 operation the right wheel is reduced and the machine turns to the right. Turning on the spot (zero turn) can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. Operating on hills Read the Safety Instructions “Driving on Slopes” in the “Safety Instructions”. WARNING!Do not drive across slopes. • The slowest speed possible should be used before starting up or down hills. • If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the parking brake. IMPORTANT INFORMATION When in reverse, control levers return to neutral when released. This may cause the mower to suddenly stop. • To restart movement, release the parking brake. • Pull the control levers back to the center of the mower and press forward to regain forward motion. • Make all turns slowly. Place controls in neutral position 8061-012b Released parking brake 8061-010 English-32 operation Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing result is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the hot months. For healthier and better looking lawns, mow often after moderate growth. For best cutting performance, grass over 6" (15 cm) in height should be mowed twice. • The mowing result will be best with a high engine speed (the blades rotate rapidly) and low speed (the rider moves slowly). If the grass is not too long and dense, the driving speed can be increased without negatively affecting the mowing result. The lawn becomes more even and the grass clippings more evenly distributed over the mown area. [. . . ] 90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein. Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months. Rental Warranty: 90 days on all applicable professional equipment reference warranty time period charts located in the back of the Retailer Warranty Policy & Procedure Manual. Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA MZ ZTR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA MZ ZTR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.