User manual HUSQVARNA PS50

[. . . ] DO use only blades marked with a maximum operating speed greater than the blade shaft speed. DO use caution and follow the instructions when loading and unloading the saw. Handle Motor stop Lowering handwheel Graduated scale Engine Engine oil drain Front guide Belt cover Disk casing Service spanner Water intake tap Tank (17 litres) Handling - Transport Switch off the disk prior to moving the machine on jobsite. SPECIAL INSTRUCTIONS The disc cutter is designed to provide safe and reliable service in operating conditions corresponding with the instructions, but it can present dangers for the user and risks of damage, consequently regular on site inspection is necessary to ensure : · Perfect technical condition (use for the purpose for which it is intended and taking into account any risks, and correction of any malfunction detrimental to safety). [. . . ] Use a diamond disk for cutting with water (sawing new or old concrete, tarmac or asphalt). Competent staff (qualifications, age, training) who have read and understood the manual in detail before starting work: any electrical, mechanical or other problem should be investigated by a qualified maintenance engineer (electrician, maintenance manager, approved dealer, etc . That the warnings and instructions marked on the machine are followed (adequate personal protection, correct use, general safety instructions, etc). That no modification, transformation or addition is detrimental to safety and that it is carried out without prior authorization from the manufacturer. The ground-saw only needs pushing to move it into position on the site. DO NOT DO NOT allow other persons to be near the saw when starting, refueling or when cutting. Check before starting Please read the instructions for use prior to operating the machine for the first time. The working area must be completely cleared, well lit and all safety hazards removed (no water or dangerous objects in the vicinity) The operator must wear protective clothing appropriate to the work he is doing. We recommend that this includes both eye and ear protection The use of ear protection is mandatory. For extremely dusty conditions you may have to clean the air filter element 2 to 3 times a day. Make sure the disc supports surfaces, the adaptor plates and the spindle are kept clean. The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification, alteration or powering that does not conform to the manufacturer's original specifications. At the work station, the sound pressure level may exceed 85xdbx(A) In this case individual protection measures must be taken. When working in a limited or closed area, make sure that the ventilation is adequate. The exhaust gases contain carbon monoxide (exposure to this toxic gas can cause loss of consciousness and can be fatal). Remove all adjustment tools and wrenches Store diamond tool in a safe place so it cannot be bent or damaged. For quick supply of spare parts and to avoid any lost time it is essential to quote the data on the manufacturer's plate fixed to the machine and the part number of the part to be replaced with every order. 00000000 Item number See exploded view (0) Quantity Scrapping In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force. [. . . ] 00000000 Item number See exploded view (0) Quantity Scrapping In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force. It may be necessary after using a few times to retension the belts, without overtightening them. Tighten the tensioning nuts (N), these The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice. [. . . ]