User manual HUSQVARNA R150S

[. . . ] C) Engines with primer system: Press the fuel-enrichment pump (2) located on the carburettor 3 or 4 times position the accelerator lever (13) on MAX. For further information and explanations, read carefully the user instruction manual of the engine. LHold the engine start-grip (11) and pull the starter rope gently until you feel the resistance caused by compression. Return the starter rope slowly then pull the handle firmly towards you to its full extent. [. . . ] How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position. To cut the grass, push the lawn mower manually or insert the automatic advance gear. 1°~ 0 , 6 m/s 2°~ 0 , 9 m/s 3°~ 1 , 2m/s How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position. To cut the grass, push the lawn mower manually or insert the automatic advance gear. Before proceeding with the coupling of the automatic feed, choose the speed by means of the change lever (20). When the handle (14) is released the blade stops while the motor continues running. With engine running, pull the handle (14) towards the bar and keep depressed. Push the blade engagement lever (19) forward to make the blade rotate. To cut the grass, push the lawn mower manually or insert the automatic advance gear. Before proceeding with the coupling of the automatic feed, choose the speed by means of the change lever (20). 1°~ 0 , 6 m/s 2°~ 0 , 9 m/s 3°~ 1 , 2m/s How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position. M) Never lift the rear of the mower while starting the engine or during normal operation. N) If the blade happens to hit any obstacle, stop the engine at once and remove the spark plug cap. A)Make sure that all nuts, bolts, and screws are kept well tightened to keep the mower in a safe operating condition. B)Never leave the machine with fuel in the tank within an enclosed area where the fuel vapours could reach naked flames or sparks. D)Keep the engine, silencer, battery compartment and petrol tank free from grass, leaves and excess lubricant, in order to reduce the danger of fire. E)Frequently check the grass catcher for wear or deterioration f)For safety reasons, be sure to replace worn-out or damaged parts in due time. G)If the fuel tank has to be drained, it is essential that this be done outdoor. H)Assemble the blades following the corresponding instructions and use only blades bearing the maker's name or the trademark of the manufacturer or supplier and marked with the reference number. I)To protect hands during disassembly or assembly of the blades, it is absolutely essential to wear suitable protective gloves. A)When mowing, wear strong footwear (boots or heavy shoes) and long trousers. B)Before you start mowing, make sure that the blade and blade fixing screw are securely fastened. [. . . ] B)Before you start mowing, make sure that the blade and blade fixing screw are securely fastened. C)Turn off the engine, wait until the blade has stopped and remove the spark plug cap before: l transporting, lifting or moving the machine away from the working area; l carrying out maintenance or cleaning, or when carrying out any operation on the blade; l adjusting the cutting height; l leaving the machine unattended. the fuel is highly inflammable: lStore fuel in containers specifically designed for this purpose. Switch off the motor and disconnect the spark plug before undertaking any maintenance work. [. . . ]