User manual HUSQVARNA R153 S3 BBC

[. . . ] While mowing, stay alert for any foreign objects which may have been missed. Never lift the rear of the mower while starting the engine or during normal operation. Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running. [. . . ] In particular, the pinion (21) and the gear (22) must be kept perfectly clean. To carry out this check, you must remove the wheel (23) by unscrewing the screw (24). A)Persons under 16 years of age and persons who are not familiar with the user instructions must not use the lawn mower. B)The operator is responsible for the safety of other people in the working area. Keep children and domestic animals at a safe distance when the lawn mower is in use. , for flattening out bumps in the ground, such as mole-hills or ant- hills). E)Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed. Under no circumstances open the fuel tank cap or add petrol when the engine is running or when it is still hot. L If the petrol has overflowed, do not under any circumstances start up the engine. Move the mower away from the area where fuel has bean spilt and avoid any source of possible ignition until the petrol fumes have dissipated. E)Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. G)Exercise extreme caution when turning or when pulling the lawn mower towards you. H)Particular precautions must be taken when mowing on slopes or downhill stretches: lUse appropriate antislip footwear. Deflector, grass catcher) are securely in position and in good condition. Failure to do so may result in foreign objects being ejected by the blade. [. . . ] LFrequently check the mower and ensure that all grass deposits are removed from beneath the deck. LNever clean the mower by pouring water over it: this may seriously damage the electric start system. LFrequently remove the wheel screws clean whith petroleum and oil before replacing. [. . . ]