User manual INDESIT D 41

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT D 41. We hope that this INDESIT D 41 user guide will be useful to you.


INDESIT D 41 : Download the complete user guide (384 Ko)

Manual abstract: user guide INDESIT D 41

Detailed instructions for use are in the User's Guide.

[. . . ] Dishwasher Instruction for installation and use D 41 Safety Is a Good Habit to Get Into NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance of the appliance. This appliance complies with the following EEC directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; - 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications. 2. After removing the packing, check to make sure that the appliance is not damaged. 3. The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. [. . . ] To adjust the rack, open up the tabs that lock the guides and pull out the rack. Arrange the rack with the back wheels in either the top or bottom position and then insert it along the guides until the front wheels are on as well. F 4 5 GB Turning on the Appliance Starting a wash cycle. . . . After having completed all of the installation steps in the preceding paragraphs, turn on the water to the unit and press the ON-OFF button (A) located on the control panel. Turn the cycle selector knob "D" until the reference notch on the knob corresponds with the number or the symbol for the cycle you wish to set (have a look at the wash cycle table on page 7). After a few seconds, you will hear a short beep and the indicator light "G" comes on, indicating that the wash cycle has begun and it is not advisable to make any changes at this point. Cycle phase indicator lights The dishwasher is provided with 4 indicator lights "G" which come on in sequence as the appliance is performing that specific phase of the wash cycle. These phases are, from left to right: If you forget to load some of the dishes. . . The end of the wash cycle is signalled by 2 short beeps and a flashing drying phase indicator light "G". Turn the appliance off by pressing button "A", thus cutting off the electricity supply. The wash cycle stops and then restarts when the electricity comes back on or when you close the door. pre-wash, wash, rinses, drying Cancelling or modifying a wash cycle in progress. . . . . Premise: You can cancel the wash cycle in progress, if it has only just started. To modify a wash cycle in progress, turn the knob anticlockwise and set it to Reset, after a few seconds you will hear 4 beeps and indicator light "G" will go out: this means all the settings have been cancelled. You are now free to reset the correct wash cycle. Warning If opening the door soon after the end of the programme, or during it, stand away from the Dishwasher, to avoid possible injury from hot steam. GB 6 Wash Cycle Table Cycle Cycle selection instructions Cycle description Detergent for prewash + wash Rinse Aid 1) Heavy Duty Very dirty dishes and pans (not to be used for delicate items). Pre-wash with cold water Pre-wash with hot water at 45°C Extended wash at 70°C. Drying. 5+15 gr. * 2) Normal wash Normally dirty pans and dishes. Drying. 5+15 gr. * 3) Rapid 25' Economic and fast cycle to be used for slightly dirty dishes. Cold rinse. 15 gr. 4) Soak Preliminary wash cycle for dishes and pans awaiting completion of the load with the dishes from the next meal. Short cold wash to prevent food from drying onto the dishes. 7 GB Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. All you need to do is rinse them under running water; to remove these, pull the cup handle upwards. The entire filter assembly, comprising a semi-circular filter "A", a cup "C", and a cylindrical filter "B" should be cleaned thoroughly once a month. Reassemble the three parts as shown in the figures and reinsert the whole assembly into the dishwasher, positioning it into its housing and pressing downwards. [. . . ] Cold Water Connection Connect the cold water supply hose to a threaded 3/4 (gas) connector, inserting the small filter supplied with the dishwasher and making sure that it is fastened tightly in place (see figure 2). If the water pipes are new or have not been used for an extended period of time, let the A water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the Fig. 2 water inlet can get blocked and damage the appliance. Hot Water Connection The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT D 41




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT D 41 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.