User manual INDESIT DISR 16M19 A EU
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT DISR 16M19 A EU. We hope that this INDESIT DISR 16M19 A EU user guide will be useful to you.
Manual abstract: user guide INDESIT DISR 16M19 A EU
Detailed instructions for use are in the User's Guide.
[. . . ] Read the instructions carefully, as they include important information on safe installation, use and maintenance. This appliance was designed for domestic use or similar applications, for example: - farmhouses; - use by guests in hotels, motels and other residential settings; - bed & breakfasts. Remove the appliance from all packaging and make sure it was not damaged during transportation. If it was damaged, contact the retailer and do not proceed any further with the installation process. [. . . ] The number and type of wash cycles and options may vary depending on the dishwasher model. 26
Only use products which have been specifically designed for dishwashers. If you are using a multi-function product, we recommend that you add salt in any case, especially if the water is hard or very hard. ) If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights will remain lit. The use of salt prevents the formation of LIMESCALE on the dishes and on the machine's functional components. If there are drops of water or limescale marks on the dishes, set a high number (3-4). Setting the water hardness
For perfect water softener operation, it is essential that the adjustment be based on the water hardness in your house. Switch it off using the On/Off button • Hold down button P for 5 seconds until you hear a beep. Switch it on using the On/Off button • The current selection level number and salt indicator light flash (flashing indicator only). Press button P to select the desired hardness level (see hardness table). 27
Loading the racks
Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. )
If the rack is equipped with a Lift-Up device* (see figure), lift it up by holding its sides. To restore the lower position, press the levers (A) at the sides of the rack and follow the rack down. Parts in synthetic material which do not withstand high temperatures. The colours of glass decorations and aluminium/silver pieces can change and fade during the washing process. Tips:
• Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe. Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over. 29
Detergent and dishwasher use
Measuring out the detergent
Good washing results also depend on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. In the case of normally soiled items, use approximately either 25g (powder detergent) or 25ml (liquid detergent). If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. For good washing results also follow the instructions shown on the detergent box. [. . . ] It is therefore recommended that you check the arms from time to time and clean them with a small non-metallic brush. To remove the upper spray arm, turn the plastic locking ring in an anti-clockwise direction. The upper spray arm should be replaced so that the side with the greater number of holes is facing upwards. Cleaning the spray arms
The lower spray arm can be removed by pressing on the side tabs and pulling it upwards. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT DISR 16M19 A EU
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT DISR 16M19 A EU will begin.