User manual INDESIT FIM51KABK

[. . . ] The appliance must not come into contact with electrical parts once it has been installed. The consumption indications on the data plate have been calculated for this type of installation. Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below). Open the terminal board by inserting a screwdriver into the side tabs of the cover. [. . . ] Cooling ventilation In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door. Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently. See the Cooking advice table for cooking modes and the suggested cooking temperatures (see Cooking Modes). When preheating is finished, the THERMOSTAT indicator light will stay on: place the food in the oven. You may do the following during cooking: - change the cooking mode by turning the SELECTOR knob. - stop cooking by turning the SELECTOR knob to the “0” position. Never put objects directly on the oven bottom to avoid damaging the enamel coating. To set the buzzer, turn the TIMER knob clockwise almost one complete revolution. Turn the knob anticlockwise to set the desired time: align the minutes shown on the knob with the indicator on the control panel. The timer operates in minutes: when the selected time has elapsed, a buzzer will sound. ) • serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging. A cooking duration must be set before the cooking end time can be scheduled. Use the “+” and “-” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. The DISPLAY shows the cooking end time and the cooking duration alternately. Cancelling a programme To cancel a programme: button until the icon corresponding to • press the the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-” button until the digits 00:00 appear on the display. € Press and hold the “+” and “-” buttons; this will cancel all the settings selected previously, including timer settings. The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously. After the appliance has been connected to the icon and the four mains, or after a blackout, the numerical digits on the DISPLAY will begin to flash. Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. [. . . ] 20 Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Inspecting the seals Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). GB Cleaning the appliance • The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. [. . . ]