User manual INDESIT IDP147

[. . . ] Operating instructions DISHWASHER EN English, 1 Contents Installation, 2-3-4 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Electrical connection Description of the appliance, 5 Overall view Control panel Loading the racks, 6 Lower rack Cutlery basket Upper rack IDP 147 Start-up and use, 7-8 Starting the dishwasher Measuring out the detergent Wash options Wash cycles, 9 Table of wash cycles Rinse aid and refined salt, 10 Measuring out the rinse aid Measuring out the refined salt Care and maintenance, 11 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Precautions and advice, 12 General safety Disposal Saving energy and respecting the environment Troubleshooting, 13 Guarantee, 14 After Sales Service, 15 Installation EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments. Connecting the water inlet hose • To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection. [. . . ] Pre-wash for dishes while awaiting completion of the load with the dishes from the next meal. Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. (Run cycle immediately after use) (2 plates + 2 glasses + 4 pieces of cutlery + 1 saucepan + 1 small frying pan). Economic and fast wash for delicate items which are sensitive to high temperatures. (Run cycle immediately after use) (glasses upper rack + delicate plates lower rack). 1. Intensive 35 g (A) 30 ml (A) 1 (A) Yes A-B 2:25’ 2. Daily 29 g (A) 6 g (B) 29 ml (A) 6 ml (B) 1 (A) Yes A-B 1:50’ 3. Smart Sixty 25 g (A) 25 ml (A) 1 (A) No A-B 1:00’ 4. Eco* 29 g (A) 6 g (B) 29 ml (A) 6 ml (B) 1 (A) Yes A-B 2:55’ 6. Speed 35’ 25 g (A) 25 ml (A) 1 (A) No A 0:35’ 7. Delicate 35 g (A) 35 g (A) 1 (A) Yes A-B 1:30’ Notes: Optimum performance levels when using the "Smart Sixty and Speed wash" cycles can be achieved by observing the maximum amounts of crockery specified. To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 gr. of powder = approximately 5 ml of liquid * The Eco wash cycle adheres to the regulation EN-50242. Although it has a longer duration than other wash cycles it uses less energy and is les harmful to the environment. Note for Test Laboratories: for information relating to comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany. com 9 Rinse aid and refined salt EN Only use products which have been specifically designed for dishwashers. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. There is a water hardness level for every wash cycle: E. g. : wash cycle 1, water hardness level 1 wash cycle 2, water hardness level 2, etc. - To exit the function, wait approximately few seconds or press another option* button, or switch off the machine using the ON/ OFF button. Even if using multi-functional tablets, the salt dispenser should still be filled. If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights remain lit. Water Hardness Table °dH 0 6 6 11 12 17 17 34 34 50 °fH 0 11 21 31 61 10 20 30 60 90 mmol/l 0 1 1. 1 2 2. 1 3 3. 1 6 6. 1 9 level 1 2 3 4 5* Rinse aid makes it easier for the crockery to dry, as water runs off surfaces more readily and therefore does not leave streaks or marks. The rinse aid dispenser should be filled: • When the LOW RINSE AID* indicator light on the control panel is illuminated; 1. Open the dispenser by turning the lid (G) in an anticlockwise direction. Pour in the rinse aid, making sure it does not overflow from the dispenser. NEVER pour the rinse aid directly into the appliance tub. Measuring out the rinse aid For values between 0°f and 10°f, we do not recommend the use of salt. * this setting may cause a slight increase in the duration of the cycle. (°dH = hardness measured in German degrees - °f = hardness measured in French degrees - mmol/l = millimoles per litre) Adjusting the amount of rinse aid If you are not completely satisfied with the drying results, you may adjust the quantity of rinse aid used. [. . . ] Switch off the appliance using the ON/OFF button, turn on the tap and switch the appliance back on after 20 seconds by pressing the same button. • • • • • The dishes and glasses are covered in a white film or limescale deposits. The crockery has not been dried properly. The dishes are not clean. The dishwasher does not take any water in - Tap shut-off alarm (several short beeps are emitted*) (the Drying and End indicator lights flash). Water inlet hose alarm / Water inlet • Switch off the appliance by pressing the ON/OFF button. Shut off the water tap to eliminate the risk of flooding and remove the plug from the electrical socket. [. . . ]