User manual INDESIT INF140G

[. . . ] • When turning off the display by detaching the power cord, wait for 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. • Do not subject the display to severe vibration or high impact conditions during operation. [. . . ] Press the MENU button on the remote control to display the OSD menu. 2. In the submenu, press the UP/DOWN button to toggle between items, or press PLUS/MINUS button to adjust settings. Press the EXIT button on the remote control to return to the previous menu, or press the MENU button to exit the OSD menu. RETURN TO THE CONTENTS User Manual INF140G 4. 1. 2. In the submenu, press the / button to toggle between items, or press / button to adjust settings. Press the MENU button on the remote control to return to the previous menu, or press the MENU button repeatedly to exit the OSD menu. RETURN TO THE CONTENTS User Manual INF140G 4. 2. OSD MENU OVERVIEW PICTURE MENU P IC T UR E BR IGH TNE S S CON T RA ST S HA RP NE S S BL ACK L E V E L NOI S E RE DU CTI O N TI NT COL O R COL O R T EM P E RAT U RE COL O R C O NTR O L L I G H T SE N SO R S MA RT CON TRAS T V ID EO S O UR CE P IC T UR E RE S E T 10 0 50 5 70 OFF 50 50 10 00 0 K OFF OFF Se l A djus t E nter Ba ck Qui t BRIGHTNESS Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. The black portions of the picture become richer and the whites become brighter. NOISE REDUCTION Note: For VIDEO, S-VIDEO, COMPONENT and HDMI inputs with interlaced video only. Press the MINUS button and the flesh tone color turns slightly purple. Press the PLUS button to increase color intensity, or press the MINUS button to decrease it. The image has a reddish tint with a lower color temperature, whilst a higher color temperature gives off a more bluish tint. CUSTOM ZOOM Note: This item is only available when ZOOM MODE is set to CUSTOM. You can use this function to further customize the zoom settings to suit the image you want to display. Use the UP/DOWN button to toggle between the following items, and use the PLUS/MINUS button to adjust. • ZOOM - Expands the horizontal and vertical sizes of the image simultaneously. • HZOOM - Expands the horizontal size of the image only. • VZOOM - Expands the vertical size of the image only. • H POSITION - Moves the horizontal position of the image left or right. • V POSITION - Moves the vertical position of the image up or down. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu. RETURN TO THE CONTENTS User Manual INF140G 4. 2. 3. AUDIO MENU AU DI O V O L UM E M UTE AU DI O S O UR CE S P EA KE R AU DI O RE S E T 30 OFF IN TE RNA L Se l A djus t E nter Ba ck Qui t VOLUME Adjust to increase or decrease the audio output level. AUDIO SOURCE To select the audio input source according to the source connected to the audio input and HDMI sockets on the display. AUDIO 3 AUDIO 1 AUDIO 2 HDMI Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between • AUDIO 1 • AUDIO 2 • AUDIO 3 • HDMI SPEAKER Set the display to play audio using the built-in (internal) speaker, external speakers or external audio devices (if connected). Use the PLUS/MINUS button to toggle between • INTERNAL • EXTERNAL • LINE-OUT AUDIO RESET Reset all settings in the AUDIO menu. [. . . ] Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damages to the object as well as the display itself. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. [. . . ]