User manual INDESIT IS50D1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT IS50D1. We hope that this INDESIT IS50D1 user guide will be useful to you.
Manual abstract: user guide INDESIT IS50D1
Detailed instructions for use are in the User's Guide.
[. . . ] Operating Instructions
Contents WARNING, 2 Installation, 2-6
Positioning and levelling Electrical connection Gas connection Adapting to different types of gas Technical data Table of burner and nozzle specifications
Description of the appliance, 7
Overall view Control panel
Start-up and use, 8-10
Using the hob Using the oven Electronic timer Oven cooking advice table
Precautions and tips, 11
General safety Disposal Respecting and conserving the environment
Care and maintenance, 12
Switching the appliance off Cleaning the appliance Gas tap maintenance Replacing the oven light bulb Assistance You must read these instructions prior to using your appliance and retain them for future use.
WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] Never use a flame.
Adapting to different types of gas
It is possible to adapt the appliance to a type of gas other than the default type (this is indicated on the rating label on the cover). Press the BURNER knob and turn it in an anticlockwise direction so that it is pointing to the maximum flame setting E. Adjust the intensity of the flame to the desired level by turning the BURNER knob in an anticlockwise direction. This may be the minimum setting C, the maximum setting E or any position in between the two.
Fast (R) Semi Fast (S) Auxiliary (A) Burner ø Cookware diameter (cm) 24 - 26 16 - 20 10 - 14
consumed, it is recommended that only pans that have a lid and a flat base are used. To identify the type of burner, please refer to the diagrams contained in the “Burner and nozzle specifications”.
Using the oven
!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away. Before operating the product, remove all plastic film from the sides of the appliance. Select the recommended temperature for the cooking mode or the desired temperature by turning the THERMOSTAT knob. A list detailing cooking modes and suggested cooking temperatures can be found in the relevant table (see Oven cooking advice table). During cooking it is always possible to: • Change the cooking mode by turning the SELECTOR knob. • Set the total cooking time and the cooking end time (see below). • Stop cooking by turning the SELECTOR knob to the “0” position. Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged. Only use position 1 in the oven when cooking with the rotisserie spit. Always place cookware on the rack(s) provided.
If the appliance is fitted with an electronic lighting device* (see figure), press the ignition button, marked with the symbol 1, then hold the BURNER knob down and turn it in an anticlockwise direction, towards the maximum flame setting, until the burner is lit. If this occurs, repeat the operation, holding the knob down for a longer period of time. If the flame is accidentally extinguished, switch off the burner and wait for at least 1 minute before attempting to relight it. If the appliance is equipped with a flame failure safety device*, press and hold the BURNER knob for approximately 3-7 seconds to keep the flame alight and to activate the device. * To switch the burner off, turn the knob until it reaches the stop position •.
HOB GAS BURNER SAFETY DEVICE
ELECTRONIC LIGHTING DEVICE
Practical advice on using the burners For the burners to work in the most efficient way possible and to save on the amount of gas
THERMOSTAT indicator light When this is illuminated, the oven is generating heat. It switches off when the inside of the oven reaches the selected temperature. At this point the light illuminates and switches off alternately, indicating that the thermostat is working and is maintaining the temperature at a constant level. [. . . ] Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. Exhausted appliances may be collected by the public waste collection service, taken to suitable collection areas in the area or, if permitted by current national legislation, they may be returned to the dealers as part of an exchange deal for a new equivalent product. All major manufacturers of household appliances participate in the creation and organisation of systems for the collection and disposal of old and disused appliances.
Respecting and conserving the environment
• You can help to reduce the peak load of the electricity supply network companies by using the oven in the hours between late afternoon and the early hours of the morning. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT IS50D1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT IS50D1 will begin.