User manual INDESIT TFA 1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT TFA 1. We hope that this INDESIT TFA 1 user guide will be useful to you.


INDESIT TFA 1 : Download the complete user guide (308 Ko)

Manual abstract: user guide INDESIT TFA 1

Detailed instructions for use are in the User's Guide.

[. . . ] In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided. Changing the plug: Removing the plug If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either: - The plug is replaced by a fused 13amp rewireable plug bearing the BSI mark of approval. or - The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance. Disposing of the plug Cut off and dispose of the supplied plug if it does not fit your socket. [. . . ] Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. Using the refrigerator to its full potential · Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature (see Description). · Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips). · Remember that cooked foods do not last longer than raw foods. They will increase humidity in the refrigerator and cause condensation to form. Setting the temperature The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob. The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During operation, the back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused. If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically). In static appliances, the air circulates in a natural way: the colder air tends to move downwards as it is heavier. The food should be stored as follows: Food Fresh fish and meat Fresh cheese Cooked food Salami, bread loaf, chocolate Fruit and vegetables Eggs Arrangement inside the refrigerator Above the fruit and vegetable bins Above the fruit and vegetable bins On any shelf On any shelf In the fruit and vegetable bins On the shelf provided Using the freezer to its full potential · Do not re-freeze food that is defrosting or that has already been defrosted. · Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. · Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break. · The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4) !This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours. If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced. Butter and margarine On the shelf provided Bottles, drinks, milk On the shelf provided 6 Maintenance and care Switching the appliance off During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on 0 (appliance off) to eliminate all electrical contact. Defrosting the freezer compartment Remove frost regularly using the special scraper provided. If the frost layer is greater than 5 mm, it is necessary to defrost manually: 1. Wrap frozen foods in newspaper and place them in another freezer or in a cool place. This can be made easier by placing containers with lukewarm water in the freezer compartment. Clean and dry the freezer compartment carefully before switching the appliance on again. until the ideal storage conditions have been restored, before placing food in the freezer compartment. GB Cleaning the appliance · The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. · The removable accessories may be soaked in warm water and soap or dishwashing liquid. [. . . ] · The food is in contact with the back inside wall of the refrigerator. · The appliance has not been installed on a level surface (see Installation). · The appliance has been installed between cabinets that vibrate and make noise. · The internal refrigerant makes a slight noise even when the compressor is off. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT TFA 1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT TFA 1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.