User manual INDESIT UIAA10FI
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT UIAA10FI. We hope that this INDESIT UIAA10FI user guide will be useful to you.
Manual abstract: user guide INDESIT UIAA10FI
Detailed instructions for use are in the User's Guide.
[. . . ] - model - model - malli - modell - modell - modell - modello - modle - modelo - modelo ??????
- serial number - serienummer - serjanumero - serienummer - serienummer - modellnummer - numero di serie - numro de srie - nmero de serie - nmero de srie ????????????????
- model - model - malli - modell - modell - modell - modello - modle - modelo - modelo ??????
- serial number
- serienummer - serjanumero
- serienummer - serienummer - modellnummer - numero di serie - numro de srie - nmero de serie - nmero de srie ????????????????
Description of the appliance
The instructions contained in this manual are applicable to different model refrigerators. [. . . ] The function is disabled automatically after 24 hours or when optimal temperatures have been reached (indicator light goes out); - for large quantities which are greater than the maximum load indicated on the data plate, hold down the rapid freezing SUPER FREEZE button until the corresponding indicator light begins to flash. After 24 hours the indicator light stops flashing and remains on constantly. After another 24 hours, the function will be disabled automatically (indicator light goes out). If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours. Ice3 ice tray The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided). Check that the tray is ompletely empty and fill it with water through the opening provided. Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray). Turn the tray 90: due to the connected compartments each mould fills with water (see diagram). Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again. When the ice has formed (minimum time approximately 8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening. The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open. The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03. General safety
MAX WATER LEVEL
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact. The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. [. . . ] Kompressoren og kondensatoren udsender varme og skal have en god ventilation for at kunne fungere optimalt og klare det elektriske forbrug. For at sikre at madvarerne ikke placeres for tt op ad den bageste vg, kan man montere de medflgende afstandsstykker. Bagsiden af apparatet samler let stv, som kan fjernes forsigtigt med en stvsuger indstillet til lav sugeevne, efter at have slukket for apparatet og taget stikket ud af stikkontakten. For at genoprette normal funktion: Drej knappen TEMPERATURREGULERING p (slukket), og tnd for apparatet igen. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT UIAA10FI
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT UIAA10FI will begin.