User manual INDESIT VRM 640 M C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT VRM 640 M C. We hope that this INDESIT VRM 640 M C user guide will be useful to you.


INDESIT VRM 640 M C : Download the complete user guide (760 Ko)

Manual abstract: user guide INDESIT VRM 640 M C

Detailed instructions for use are in the User's Guide.

[. . . ] Ces ouvertures doivent être agrandies de 100% (surface minimale 2 cm2) en cas d’appareils dépourvus du dispositif de sécurité de flamme et quand l’afflux de l’air provient de manière indirecte de A FR pièces voisines (voir figure B) – à condition qu’il ne s’agisse pas de parties communes du bâtiment, de chambres à coucher ou de locaux à risque d’incendie – équipées d’un conduit d’aération avec l’extérieur comme décrit plus haut. Il faut prévoir une distance de 700mm si les éléments suspendus sont inflammables (voir figure); • ne placez pas de rideaux derrière la cuisinière ou sur ses côtés à moins de 200 mm de distance; • pour l’installation de hottes, conformez-vous aux instructions de leur notice d’emploi. *N’existe que sur certains modèles 11 Operating Instructions COOKER FR Français, 1 GB English, 12 Contents Installation, 13-16 Positioning and levelling Electrical connections Gas connection Adapting to different types of gas Technical data Table of burner and nozzle specifications Description of the appliance, 17 Overall view Control panel Start-up and use, 18-20 K6G2S/FR KN6G2S/FR KN6G21S/FR Using the hob Using the oven Oven cooking advice table Precautions and tips, 21 General safety Disposal Respecting and conserving the environment Maintenance and care, 22-23 Switching the appliance off Cleaning the appliance Gas tap maintenance Replacing the oven light bulb Assistance Installation !Before operating your new appliance please read this instruction booklet carefully. [. . . ] Replace all the components by following the above instructions in reverse. Unscrew the nozzle using a special nozzle socket spanner (see figure) or with a 7 mm socket spanner, and replace it with a new nozzle that is suited to the new type of gas (see Burner and nozzle specifications table). Turn the knob to the minimum position (MIN) after it has been in the maximum position (MAX) for approximately 10 minutes. Tighten or loosen the adjustment screws on the outside of the thermostat pin (see figure) until the flame is small but steady. In the case of natural gas, the adjustment screw must be unscrewed by turning it anti-clockwise. TECHNICAL DATA Oven Dimensions HxWxD Volume Useful measurements relating to the oven compartment 31x43, 5x43, 5 cm 58 l width 46 cm depth 42 cm height 8, 5 cm see data plate may be adapted for use with any type of gas shown on the data plate. Turn the knob from the MAX position to the MIN position quickly or open and shut the oven door, making sure that the burner is not extinguished. Turn off all the burners and the electric plates before closing the lid. 00 (mm) 41 30 30 52 Liquid Gas Nozzle 1/100 (mm) 86 70 50 78 Nominal (mbar) Minimum (mbar) Maximum (mbar) 16 Description of the appliance Overall view GB Gas burner Hob grid Control panel Containment surface for spills GUIDE RAILS for the sliding racks position 5 position 4 position 3 position 2 position 1 Adjustable foot GRILL DRIPPING PAN Adjustable foot Control panel GRILL pilot light TIMER knob Hob BURNER control knobs OVEN control knob OVEN BURNER ignition button* HOB BURNER ignition button* GRILL pilot light TIMER knob Hob BURNER control knobs OVEN control knob OVEN BURNER HOB BURNER ignition button* ignition button* * Only available in certain models. 17 Start-up and use GB Using the hob Lighting the burners For each BURNER knob there is a complete ring showing the strength of the flame for the relevant burner. Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged. Only use position 1 in the oven when cooking with the rotisserie spit. Lighting the oven To light the oven burner, bring a flame or gas lighter close to opening F (see figure) and press the OVEN control knob while turning it in an anticlockwise direction until it reaches the MAX position. F If the appliance is fitted with an electronic lighting device* (see figure), press the OVEN knob and turn it in an anticlockwise direction, towards the MAX position, until the burner is lit. If, after 15 seconds, the burner is still not alight, release the knob, open the oven door and wait for at least 1 minute before trying to light it again. If there is no electricity the burner may be lit using a flame or a lighter, as described above. The oven is fitted with a safety device and it is therefore necessary to hold the OVEN control knob down for approximately 6 seconds. 18 Adjusting the temperature To set the desired cooking temperature, turn the OVEN control knob in an anticlockwise direction. Temperatures are displayed on the control panel and may vary between MIN (140°C) and MAX (250°C). Once the set temperature has been reached, the oven will keep it constant by using its thermostat. Place the rotisserie support in position 4 and insert the spit in the hole provided on the back panel of the oven. Activate the rotisserie with the BUTON/KNOB Oven light This is switched on by turning the OVEN knob to any position other than “0”. [. . . ] Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair. € It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll. € The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. € The hob grids, burner caps, flame spreader rings and the hob burners can be removed to make cleaning easier; wash them in hot water and non-abrasive detergent, making sure all burnt-on residue is removed before drying them thoroughly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT VRM 640 M C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT VRM 640 M C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.