User manual INDESIT WIXXE167S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT WIXXE167S. We hope that this INDESIT WIXXE167S user guide will be useful to you.


INDESIT WIXXE167S : Download the complete user guide (302 Ko)

Manual abstract: user guide INDESIT WIXXE167S

Detailed instructions for use are in the User's Guide.

[. . . ] Q Minimum gap 10mm If you are going to install the appliance under a work counter, be sure to leave a 10mm space between the Minimum gaps top and any other objects 15mm on or above the machine and a 15mm space between the sides and lateral furnishings or walls. If your dryer is installed next to a drain the water can be plumbed into this drain. If the dryer is stacked onto or installed next to a washing machine it can share the same drain. The height of the drain must be less than 3' (1m) from the bottom of the dryer. [. . . ] Warning, if after pressing the start button, the programmes knob position is changed, the new position will NOT change the programme selected. These buttons are used to customise the selected programme to your requirements. A programme must have been selected on the programme knob before an option can be selected. Not all options are available for all programmes (see Start and Programmes). If an option is not available and you press the button, the buzzer will beep four times. If the option is available there will be one beep and the option light above the button lights to confirm the selection. After the start button has been pressed only the Alarm option can be changed. Progress ( Drying, CoolTumble, Post Creasecare) / Delay (3hr 6hr 9hr 12hr) Lights When the light above the delay button is on, these lights flash to indicate the delay time is selected. During other programmes they indicate the progress of the dryer, each one comes on as the corresponding phase starts. Time Delay The start of some programmes (see Start and Programmes) can be delayed for up to 12 hours in 3hr steps. When a delayed start is in progress the light above the delay button will be on and the selected delay period light will flash (after the start button has been pressed). Check symbols on clothing labels to make sure that the articles can be tumble dried. Q Wring out each item in order to eliminate as much excess water as possible. Wash Care Labels Look at the labels on your garments, especially when tumble drying for the first time. The following symbols are the most common: May be tumble dried Do not tumble dry Tumble dry at high heat setting Tumble dry at low heat setting Maximum load size Do not load more than maximum capacity. These numbers refer to dry weight: Natural fibres: 7kg max (15lb) Synthetic fibres: 3kg max (6. Articles that containing rubber or rubber-like materials or plastic film (pillows, cushions, or PVC rainwear), any other flammable articles or objects that contain flammable substances (towels soiled with hair spray). Glass fibres (certain types of draperies) Items which have been dry cleaned Items with the ITCL Code (see Special clothing items). q Clean the condenser unit after regular intervals (see Maintenance). WARNING: Never stop the dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. This tumble dryer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. This tumble dryer has been designed for home, and not professional use. [. . . ] Clean the surface of the seals and replace, making sure that the catches have been secured. Empty the water container after each cycle Pull the container out of the dryer and empty it into a sink or other suitable drain. Always check and empty the container before you start a new drying programme. External parts in metal or plastic and rubber parts can be cleaned with a damp cloth. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT WIXXE167S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT WIXXE167S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.