User manual INDESIT XWDE 861480X W


If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT XWDE 861480X W. We hope that this INDESIT XWDE 861480X W user guide will be useful to you.

INDESIT XWDE 861480X W : Download the complete user guide (2437 Ko)

You may also download the following manuals related to this product:

   INDESIT XWDE 861480X W (2407 ko)

Manual abstract: user guide INDESIT XWDE 861480X W

Detailed instructions for use are in the User's Guide.

[. . . ] GB GB English Contents Installation, 16-17 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Care and maintenance, 18 Cutting off the water and electricity supplies Cleaning the washer-dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose XWDE 861480 Precautions and tips, 19 General safety Disposal Opening the porthole door manually Description of the washer-dryer, 20-21 Control panel Display How to run a wash cycle or a drying cycle, 22 Wash cycles and options, 23-24 Table of wash cycles Wash options Push&Wash+Dry Detergents and laundry, 25-26 Detergent dispenser drawer Bleach cycle Preparing the laundry Special wash cycles Load balancing system Troubleshooting, 27 Service, 28 15 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washerdryer is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”. Press the “PUSH&WASH+DRY” button to start the programme. Press the button; the START/PAUSE indicator light will flash slowly in a green colour. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes and wash cycles on the following page. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”. A temperature and spin speed is set for each wash cycle; these values may be adjusted. The machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. The temperature can be decreased by pressing the button, until the cold wash “OFF” setting is reached. The spin speed may be progressively reduced by pressing the button, until it is completely excluded (the “OFF” setting). Exception: if the 8 programme is selected, the temperature can be increased up to a value of 90°C. Setting the drying cyclea The first time the button is pressed, the machine will automatically select the maximum drying cycle which is compatible with the selected wash cycle. Subsequent presses will decrease the drying level and then the drying time, until the cycle is excluded completely (“OFF”). Drying may be set as follows: A- Based on the desired laundry dryness level: Cupboard : suitable for laundry which can be put back in a cupboard without being ironed. B - Based on a set time period: between 210 and 30 minutes 22 If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table of wash cycles), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a “Drying only” cycle. Note: a cooling-down period is always added to the end of each drying cycle. After selecting the desired cycle (compatible with the type of garments), press button to exclude the washing phase and start the drying phase at the maximum level for the selected cycle. The drying level or time may be set and changed by pressing the drying button . To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option has been activated, the symbol lights up on the display. To remove the delayed start setting, press the button until the text “OFF” appears on the display. €¢ Press the button to enable the option; the indicator light corresponding to the button will switch on. [. . . ] If the load is excessively unbalanced, the washer-dryer performs the distribution process instead of spinning. To encourage improved load distribution and balance, we recommend small and large garments are mixed in the load. 26 Troubleshooting Your washer-dryer could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. [. . . ]


Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT XWDE 861480X W will begin.


Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.