User manual INFINITY BASSLINK LC

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INFINITY BASSLINK LC. We hope that this INFINITY BASSLINK LC user guide will be useful to you.


INFINITY BASSLINK LC : Download the complete user guide (1358 Ko)

Manual abstract: user guide INFINITY BASSLINK LC

Detailed instructions for use are in the User's Guide.

[. . . ] Moreover, depending on orientation and mounting location, BassLink may be "in phase" or "out of phase" with those speakers. The resulting conditions, known as constructive and destructive interference, also play a role in shaping the total frequency response of your system. Fortunately, BassLink has controls to optimize both of these conditions and their adjustment is explained later in the manual. CHOOSING A MOUNTING LOCATION Choose a mounting location that doesn't interfere with cargo, fold-down rear seats, or the trunk lid. The best location is usually a corner of the trunk or cargo area, as shown in Figures 1 and 2. [. . . ] For speaker-level applications, a remote connection is not required, since BassLink's Auto Turn-On feature will sense voltage on the speaker wires to automatically turn on BassLink. IMPORTANT:To enable BassLink's Auto Turn-On feature, set AUTO TURN-ON to the AUTO position (see Figure 12 on page 6). APPLICATIONS BassLink is equipped with four line-level (RCA) inputs and four speaker-level inputs. Any combination of line-level and speaker-level inputs may be used to provide nonfading bass when connected to a head unit with four outputs. BassLink audio connections for a head unit with two line-level or subwoofer (RCA) outputs. To help you plan your installation, we included five system applications in Figures 6 through 10 on pages 3 through 5. Note: The applications show the remote SUB LEVEL control which installs under the dashboard for easy in-car bass level adjustments (see page 7). 3 APPLICATIONS (CONTINUED) Figure 7. BassLink audio connections for a head unit equipped with four line-level (RCA) outputs. BassLink audio connections for a head unit equipped with two line-level (RCA) outputs and two speaker-level outputs. FRONT FRONT R REAR AUTO TURN ON OFF AUTO R REAR AUTO TURN ON OFF AUTO PHASE 0 180 PHASE 0 180 REAR L L RIGHT + LEFT + RIGHT + LEFT + REMOTE GAIN CONTROL RIGHT + REAR REMOTE GAIN CONTROL UNIVERSAL INTERFACE FRONT UNIVERSAL INTERFACE FRONT LEFT + RIGHT + LEFT + RR LR RF LF Line-Level Outputs (on Source Unit) Sub Level Control BassLink (right side) RF LF Line-Level Outputs (on Source Unit) VIOLET VIOLET/BLACK Sub Level Control GREEN/BLACK GREEN BassLink (right side) Sub Level Control FRONT R REAR AUTO TURN ON OFF AUTO FUSE20A PHASE 0 180 RR LR Speaker Wires (spliced) FRONT R REAR AUTO TURN ON OFF AUTO L POWER RIGHT + REAR REMOTE GAIN CONTROL GND REM +BATT UNIVERSAL INTERFACE FRONT LEFT + RIGHT + LEFT + SERVO Sub Level Control FUSE20A PHASE 0 180 L POWER RIGHT + REAR REMOTE GAIN CONTROL GND REM +BATT UNIVERSAL INTERFACE FRONT LEFT + RIGHT + LEFT + SERVO LF Speaker RF Speaker LF Speaker RF Speaker + RCA Stereo Cables (not supplied) + + RCA Stereo Cables (not supplied) + + Source Unit + + Splices (not supplied) Source Unit Splices (not supplied) + LR Speaker RR Speaker LR Speaker RR Speaker 4 APPLICATIONS (CONTINUED) Figure 9. BassLink audio connections for a head unit equipped with four speaker-level outputs. BassLink audio connections for a head unit equipped with two speaker-level outputs. 5 CONTROLS AND FUNCTIONS BassLink provides several controls and indicators that simplify sonic integration with virtually any vehicle's unique acoustic properties. They are located on the front and side panels, as shown in Figures 11 and 12. Unplug the RJ11 cable that connects the remote level control to BassLink. Make sure the head unit is off and its volume control is set to minimum. On BassLink's front panel, initially set all controls to their midpoint positions, as shown in Figure 11. On BassLink's side panel, initially set PHASE to 0 as shown in Figure 12. Turn on the head unit and play a favorite music track that has substantial bass. Set the head unit's volume control to 75 percent of the total output (approximately 3 o'clock on rotary controls). Adjust the GAIN control clockwise until the SERVO LED (on BassLink's side panel) begins to flash with each bass note but doesn't stay lit continuously. Listen to your system, making a mental note of the amount of upper bass being reproduced. Switch the PHASE control to 180 and listen again for upper bass content. The position that provides the most upper bass is correct, but choose either setting according to your taste. Adjust the CROSSOVER control clockwise or counterclockwise until you hear only lowfrequency information. [. . . ] UNDER-DASH MOUNTING Select a mounting location that allows easy access to the control while driving. Using the Sub Level Control as a template, mark and drill holes in the mounting surface. Attach the Sub Level Control using the mounting screws provided (Figure 13). IN-DASH MOUNTING Disassemble the Sub Level Control by removing the two Phillips-head screws on the front panel, rear panel and on top. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INFINITY BASSLINK LC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INFINITY BASSLINK LC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.