User manual INFOCUS LITEPRO 210 QUICK START

[. . . ] 009-0214-01 Don't Look Into The Lens! Be extremely careful not to look directly into the lens when the 210 is on. [. . . ] Allow the 210 to cool for at least 45 minutes before opening the lamp door to replace the lamp. Avoid touching the hot surfaces inside. Use Only The 210 Power Cord Definition of Safety Icons on Product Labels Always use the power cord that came with the 210. Although other cords might look the same, they have not been safety-tested with the 210. When you disconnect the 210, always remove the power cord from the electrical outlet first, then from the 210. Don't Defeat The Purpose Of The Grounding Plug Refer to the User's Guide for more information. The 210 is grounded through the grounding conductor on the power cord. To avoid electric shock, plug the power cord into a properly wired receptacle. Use The Correct Fuse To avoid the risk of fire, use only a T6. 3AH 250V 5x20mm fuse. Avoid Liquid Spills Avoid hot surfaces. Don't set drinks on top of the 210. Spilled liquids can flow inside causing damage. Don't Block Ventilation Openings in the case provide ventilation to protect the 210 from overheating. [. . . ] Don't place the 210 on top of or close to a computer or other heat-producing equipment. Bulb explosion hazard. [. . . ]