User manual INFOCUS LP 750 INSTALLATION GUIDE

[. . . ] In Focus recommends that a professional contractor or other facilities professional assist you in mounting this device. Additional LiteMount Products In Focus offers two additional LiteMount products that may make your ceiling mount installation easier. WARNING: This installation must be performed in compliance with your local building code requirements. [. . . ] WARNING: The ceiling structure must be able to support at least 5 times the weight of the projector and mounting hardware. 3 Place the ceiling plate or pipe extension in the ceiling so that the base box hangs down into the room. 4 Route the projector's cables through your ceiling and out the hole in the ceiling. WARNING: If the dropped ceiling is an airhandling plenum, be sure the cables are plenumrated, or install the cables within conduit. Make sure this surface faces front Make sure this surface faces front Attach the Mounting Plate to the Projector 1 Set the projector on a table with the bottom side up. Slide the mounting bracket until the quick release sleeves are at the top of the keyhole slot. CAUTION: Use only the hardware that is provided with the LP 750 Ceiling Mount. Knurled knob slide projector bracket here between the base box and the spacer 2 Make sure your cables are pulled through the center hole of the base box, then carefully lift the projector and turn it upside down so the mounting plate faces the ceiling (Figure 5). 3 Insert the projector and mounting bracket slots onto the base box hinge pins between the spacers and base box (Figure 4). Slide the projector bracket forward until the hinge pins rest fully in the vertical slots and support the projector. 4 Insert the remaining two 12 mm knurled knobs through the rear slots in the mounting bracket and into the threaded holes on the sides of the base box. (Refer to your LP 750 User's Guide for information about connecting the cables. Warrants that each "ceiling mount" sold hereunder will conform to and function in accordance with the written specifications of In Focus. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and not for the purpose of distribution or resale. The product may contain recycled components that are in new condition. Said warranty shall continue for a period of one (1) year from the date of such purchase. [. . . ] All other warranties, express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. There are no warranties that extend beyond the face hereof and the foregoing warranty shall not be extended, altered or varied except by written instrument signed by In Focus. It is understood and agreed that In Focus' liability whether in contract, in tort, under any warranty, in negligence or otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no circumstances shall In Focus be liable for special, indirect or consequential damages or lost profits, lost revenues, or lost savings. [. . . ]