User manual INFOCUS LP730

[. . . ] QUICK START  009-0290-01 (English) QUICK START Dont Look Into The Lens! Be extremely careful not to look directly into the lens when the projector is on. [. . . ] Allow the projector to cool for at least 2 minutes before opening the lamp door to replace the lamp. Avoid touching the hot surfaces inside. Use Only The 720/730 P ower Cord Definition of Safety Icons on Product Labels Always use the power cord that came with the projector. Although other cords might look the same, they have not been safety-tested with the 720 or 730. When you disconnect the projector, always remove the power cord from the electrical outlet first, then from the projector. Dont Defeat The Purpose Of The Grounding Plug Refer to the User s Guide for more information. The projector is grounded through the grounding conductor on the power cord. To avoid electric shock, plug the power cord into a properly wired receptacle. Avoid Liquid Spills Don't set drinks on top of the projector. Spilled liquids can flow inside causing damage. Dont Block V entilation Avoid hot surfaces. Openings in the case provide ventilation to protect the projector from overheating. [. . . ] Don't place the projector on top of or close to a computer or other heat-producing equipment. [. . . ]