User manual INFOCUS SP7250 Document

[. . . ] Windows 2000 USB setup Windows 2000 automatically detects and installs USB drivers for the keyboard, mouse and composite device. [. . . ] You'll need access to it when you set up the computer for use with your projector. Note that you need to install the driver once on each laptop or desktop PC you use with this projector. To install the InFocus USB Projector Control Drivers for Windows 2000 When you plug the USB cable into the USB connector on the computer, the Found New Hardware dialog box appears. 1 In the Found New Hardware Wizard, click Next. 2 Select Search for a Suitable Driver, then click Next. 3 Select Specify a Location, then click OK. NOTE If you stored the file on a floppy drive, do not select Floppy Disk Drives. Instead, click Specify a Location, then navigate to the floppy drive on your computer. USB Driver Installation for Windows 2000 2 4 To specify a path, click Browse, then navigate to the location where you stored the file, then click OK. 5 When the wizard locates the . inf file, click OK. 6 When the drivers are installed, click Finish. USB Driver Installation for Windows 2000 3 You have completed the setup on the current laptop or desktop computer. [. . . ] NOTE Windows 2000 installs the driver file in C:\WINNT\System32\drivers, and the . inf file in C:\WINNT\INF. USB Driver Installation for Windows 2000 4 [. . . ]