User manual IOGEAR GBC201

[. . . ] IBM is a registered trademark of International Business Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. [. . . ] After the installation process, the InstallShield Wizard will install the Windows CE software onto the PDA. Click Yes to install the software into the default directory on the PDA 10 Installation 7. Click on Finish to complete the installation on your PC. 8. Click on OK. 11 Installation 10. After the installation has been completed, computer, the software will be a dialogue box will appear and confirm immediately installed and configured. Read Otherwise, the software will be the instructions on the screen and make installed the next time, the PDA sure to check Add a shortcut in the Start synchronizes with the computer using menu. Note: Please refer to the PDA manufacturer's manual regarding the "factory reset" of the PDA. Turning the PDA "On" and "Off" does not reset the PDA. Insert the BluetoothTM Compact Flash Card into the compact flash slot on your PDA Congratulations!The IOGEAR Bluetooth Manager has been successfully installed on your PDA. 13 Configuring and Setting Your IOGEAR BluetoothTM CompactFlash Card Before using your newly installed IOGEAR BluetoothTM CompactFlash Card, make sure that your BluetoothTM CompactFlash Card is configured properly. NOTE: The default settings should work with your current BluetoothTM setup and only need to be changed if there is a conflict between BluetoothTM devices. 14 Configuration 1. The General BluetoothTM tab shows the current profile and status of your BluetoothTM CompactFlash card. Doubletapping the BluetoothTM Manager link will allow you to set the connections (refer to next topic: Connecting Your IOGEAR BluetoothTM CompactFlash Card To Other Bluetooth Devices). 15 Configuration 3. change the device's name and allow other BluetoothTM devices to connect to your BluetoothTM -enabled PDA. Checking the option of Other devices can discover me allows other BluetoothTM devices to see and pair to this PDA. The File Transfer tab allows you to set the security level of file transfer service and specify the folder for sharing. In the following sample, "My Document\Business" folder is shared and allow access by other devices. You are able to set various security levels such as requiring authorization and requiring authorization with passkey. 16 Configuration 5. you to set the security level of the information exchange service and you can also specify the vCard (If a vCard business card has already been setup) to be used. The Serial Port tab allows you to set the security level of the serial port service. You can also check which COM ports are being used for incoming and outbound data. 17 Configuration 7. tab allows you to set the security level of the Dial-Up Networking service and to configure the modem options. The About tab displays the BluetoothTM driver information. 18 Configuration 9. [. . . ] was designed to provide you with the latest technical information about our products. Most of the answers to your questions can be found here, so please try it out before contacting technical support. Technical support is available Monday through Friday from 8:00 am to 5:00 pm PST and can be reached at (949) 428-1111 40 Radio & TV Interference Statement WARNING!!!This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. [. . . ]