User manual IOGEAR GUN161

[. . . ] · A new dialog box should appear, make sure the default setting is selected ("Search for the best drivers for your device") and click NEXT to continue. · If you are prompted again to insert an installation CD ignore and continue on. · Check Specify a location and click Browse · Find the UN161 folder found on the CD. [. . . ] For convenience, you can drag the Mac USB Data Bridge program icon onto your desktop. 5. Operation The program enables you to connect a Mac to PC, PC to PC, or Mac to Mac for file management and transfer purposes. PC/Windows Operation · File Management 1. With the computers up and running, plug the USB Network Cable into both computers. On each computer, Double Click on the USB Bridge program's shortcut icon (on the desktop). The USB Bridge Cable Application's main window appears: Note: While not required, it is best to restart the computer before running the program. Note: While not required, it is best to restart the computer before running the program. PC Operation Cont. 3. The local computer's file and directory structure appears in the top panel; the remote computer's file and directory structure appears in the bottom panel. The directory windows operate in a similar manner to the familiar Windows Explorer file manager. To print text and document files located on either computer with your local printer, Click on the file, then select Print from the File menu. Note: There are two status indicators (that look like traffic lights) at the bottom right corner of the window. The left indicator is for the local computer; the right indicator is for the remote computer. They are green when the connection is good; red when a connection has not been established. Both lights must be green in order to exchange files between the local and remote computers. PC Operation Cont. Wakeup Power Management an d Remote The USB Bridge Cable Application supports USB power management; a feature that is critical when working with Notebooks and other mobile computers. When either computer goes into suspend mode, the program draws less than 500µA of current from it. When the remote comuter is in suspend mode, clicking on any file or folder in the Remote window wakes the computer up. 6. With the computers up and running, plug the USB Network Cable into both computers. On each computer, open the folder that contains the program files (if you haven't dragged the Mac USB DataBridge PPC program icon onto the desktop); Double Click on Mac USB DataBridge PPC. [. . . ] This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Function Connector Cable Length Data Transfer Rate Network Protocol Power Consumption Operating Temperature Specification 2 USB Type A Plugs 1. 8 m (. 9 m per segment) Up to 6 Mbps TCP/IP, NETBEUI, IPX/SPX 120 mW (max. ) 5 ~ 40û -20 ~ 60û 0 ~ 80% RH, Noncondensing Plastic 160 g Note: There are two status indicators (that look like traffic lights) at the upper left. The left indicator is for the local computer; the right indicator is for the remote computer. [. . . ]