User manual IOMEGA STORCENTER PRO NAS 250D 500GO WREV 70 MICROSOFT WINDOWS STORAGE SERVER 2003 R2

[. . . ] Power on the StorCenter Pro using the power button on the front panel. If the CD menu does not launch automatically, double click the CD icon, then double click the Start icon. Select the StorCenter Pro you would like to configure from the Discovery window, then click the Manage button. If you are logging in for the first time, the user name is Administrator and the password is ADMIN. [. . . ] The StorCenter Pro will notify you of a hard drive removal through a notification email, a flashing LED sequence on the front of the StorCenter Pro, or the graphical user interface (GUI). Interrupt the system rebuild process After inserting the replacement drive, you MUST allow the RAID volume to restore. An active restoration is indicated by either a flashing power/status LED in conjunction with continuous hard drive activity, or by continuous independent hard drive activity. During this process, do NOT remove any of the hard drives or power down the StorCenter Pro. This process may take many hours depending on the capacity of the RAID volume and amount of data that is being restored. replacing the OS Drive Your Iomega StorCenter Pro has an Operating System (OS) that resides on the first drive. In addition, a mirrored copy of the OS has been created on the second drive. Your StorCenter Pro has been configured (RAID 1) so that you can lose any single drive, including an OS drive, and the system will remain operational. In the event of failure of an OS drive, you do not need to shut down your system. Simply remove the failed drive from the system and wait for the system to indicate a successful removal. And wait for the system to restore the OS as well as any RAID volumes that were configured on the original drive. It is very important that the system is NOT shutdown and that no other drives are removed until this restoration is complete. Failure to follow these steps could result in system failure and loss of data!For more information on all of the above items, please refer to the user's manual located on the Solutions CD. This utility will restore the StorCenter Pro to its original factory state. Insert the StorCenter Pro Recovery disc into the DVD drive and boot the StorCenter Pro from the recovery DVD. Enabling eTrust The StorCenter Pro ships with a full version of Computer Associates eTrust Antivirus software preinstalled; however, the software is disabled by default. As with other third-party applications, enabling eTrust may degrade system performance. Log into the StorCenter Pro as an administrator using Terminal Services. Installing Service Packs may impact the performance of the StorCenter Pro and may prevent the StorCenter Pro from starting up. [. . . ] Remote Desktop Connection allows you to log into the StorCenter Pro as if you were actually sitting at the keyboard. There are two ways to use Terminal Services: · use the web-based administration tool. When you manage your StorCenter Pro via the Iomega Discovery Tool Pro software, you will be connected to the Web-based administration tool. Iomega, the stylized "i" logo, and all Iomega brand blocks are either registered trademarks or trademarks of Iomega Corporation in the United States and/or other countries. [. . . ]