User manual ISOUND 4X UNIVERSAL

[. . . ] Contents ~ 4X Glow ~ AC Adapter ~ Audio Cable i. SoundTM 4X Glow Set-up: Additional 4X Glow Features: 1. [. . . ] To power the 4X Glow using batteries, remove the battery door located on the back of the 4X Glow and insert 4 "AA" batteries. To power the 4X Glow using the included AC adapter, plug one end into the DC 9. V input on the left side of the 4X Glow speaker and the other end into a standard wall outlet. Open the 4X Glow's protective cover by pulling downward on the cover, slide your iPod® nano downward between the 4X Glow's Speakers, so that the extended audio pin fits into the audio input opening on the bottom of the iPod® nano. Power on the 4X Glow by switching the Speaker power button (located on the back of the Speaker Tower) to the "ON" position. Power on your iPod® nano and adjust the volume to a desired level. Speaker volume can only be adjusted by using the iPod® nano's volume control. To ensure you are experiencing the best sound quality make sure your audio devices internal equalizer is set to the proper setting. The 4X Glow features a unique GLOWING effect that can be turned on and off by switching the LED power button (located on the back of the 4X Glow) to the "ON" or "OFF position as desired. [. . . ] When the batteries start to lose power you will experience loss of sound quality and batteries should be replaced. FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM www. dreamgear. net www. isoundusa. com or visit us @ PO Box 478 Torrance, CA 90508 [. . . ]