User manual JENSEN JCR-332

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. Unplug this apparatus during lightening storms or when unused for a long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Press the ON / OFF Button (1) once, the POWER LED Indicator (14) will turn on. The Display (17) will briefly show the total number of tracks on the disc and return to the clock time after few seconds. Important : After you finish using the CD player, make sure you turn off the power by pressing the ON / OFF Button (1). NOTE : CD-Rs or CD-RWs playback capability in this player may vary depending on quality of media, CD-Burner, speed of burning and application software. SETTING THE TIME This clock displays the time in two formats, 12 hour (12H) or 24 hour (24H) and by default is set to 12H format. Connect the AC plug into the convenient standard AC outlet, the LED Display blinks. Press MIN or HOUR Buttons (11) to adjust the hours and minutes respectively. Press STOP / CLOCK Button (6) again to set the clock time and the LED Display will stop blinking. NOTE There is a PM Indicator located in the top left-hand corner of the clock display. Be sure to observe the PM Indicator when setting the time to make sure the time is set correctly for AM or PM. If the PM Indicator is `On', the time displayed is "PM". If the PM Indicator is `Off', the time displayed is "AM". Press and hold the STOP / CLOCK Button (6) for 2 seconds to change the clock format to "24H" if preferred. The LED Display will show "24H" for one second, then the clock time will be shown in 24 hour format. OTHER CD PLAYER FUNCTIONS SKIP / FAST SEARCH ( / ) (11): Press to skip forward to the next track or repeatedly to skip tracks. Press to return to the beginning of the track, or press repeatedly to skip backward several tracks. PLAY MODE(7): - Press once to go into repeat one mode, your selected track will play repeatedly. - Press twice to go into repeat all mode, the disc plays continuously. - Press three times to go into random play mode, press once to start random play. The REPEAT Indicator (24) will go off and the RANDOM Indicator (23) will light. - Press again to switch off this function, RANDOM Indicator (23) goes off. 5 4 3 2008-5-6, 11:50 PROGRAM (8): To set your own musical program. Press Button (8) once, the display shows ` ' for 2 seconds, and then " " blinks along with the PROGRAM Indicator (25). If you want to be woken by a CD or Radio, make sure that the AUX LINE-IN jack is not plugged. LISTENNING TO THE EXTERNAL DEVICE (AUX) THIS UNIT FEATURES AN AUX LINE-IN JACK FOR CONNECTING YOUR i-Pod, MP3 PLAYER OR OTHER DIGITAL MUSIC PLAYER. Connect the headphone jack of your external device to the AUX LINE-IN jack (16) located on the back of the JCR-332 (cable not included). [. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]