User manual JENSEN JIMS-182 DATASHEET

[. . . ] This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for assistance. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3 PRODUCT FEATURES JiMS-190 is an iPod® Docking Music System which incorporates the following features: - iPod®, iPod® mini, iPod classic, iPod touch and iPod nano Player / Recharger - Audio Line-in for Connecting CD Player or Other Digital Audio Player - 2 Built-in High Fidelity Aluminum Cone Speakers - Multi-function Blue Back-lit LCD Display - AM/FM Stereo Receiver with 10AM + 10FM Presets, Digital Tuning and Auto Search Function - Electronic Volume Control - Wake to Radio, Alarm or iPod® - Snooze and Sleep Functions - Built-in Contractible Aux Cord with 3. 5mm Aux Plug - External FM Antenna Jack for Better FM Reception - Card Size Remote Control for Radio and iPod® Functions - Output: 2 X 3W RMS INSTALLATION Clock Back-up Batteries Installation 1. Open the battery compartment door located at the bottom of the unit. 2. Install two DC1. 5V 'AAA' (UM-4) batteries (not included) in the battery compartment following the polarity markings shown on it. NOTE:Please disconnect the main power from the unit before replacing the clock back-up batteries. - Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. - Only batteries of the same or equivalent type as recommend are to be used. - If the unit is not to be used for an extended period of time, remove the battery. FM Antenna Installation The FM Antenna Wire is provided in the package. Please see the illustration below for FM Antenna Wire installation. Connect the FM Antenna Wire to the antenna terminal at the rear of the main unit Remote Control The remote control operates on one CR2032 battery (included). NOTE: The followings are the specifications of the three radio broadcast systems: - USA's Radio Broadcast System AM 520 1710 kHz, 10 kHz tuning step FM 87. 5 108 MHz, 0. 1 MHz tuning step - EU's Radio Broadcast System AM 522 1620 kHz, 9 kHz tuning step FM 87. 5 108 MHz, 0. 05 MHz tuning step - Japan's Radio Broadcast System AM 522 1629 kHz, 9 kHz tuning step FM 76. 0 108 MHz , 0. 1 MHz tuning step Tips for the Best Reception To obtain the best AM reception, slightly rotate the unit until the clearest signal is received or place it near outdoor. To obtain the best FM reception, fully extend the FM Antenna and adjust its direction. 2. Connect the AUX IN Stereo Plug to the Line Out Jack or Headphone Jack of an external audio device (not included). 5. Control the volume level by the volume control on the audio device or pressing the VOL +/- on the main unit or the remote control. 9 CLOCK AND CALENDAR SETTINGS The clock and calendar can be set in Power Off mode. Clock Setting 1. Press the MODE button 3 times, the clock starts to flash. 12/24 Hour Time Display Mode Setting 1. Press the MODE button repeatedly until the 12/24 Hour Format Setting mode is reached. 2. Press TUN +/- button to select 12 hour or 24 hour time display mode. Calendar Setting Year 1. Press the MODE button repeatedly until the year setting mode is reached. Month/Date 1. Press the MODE button repeatedly until the Month/Date setting mode is reached. 3. Press the MEM button to confirm the settings. 10 ALARM OPERATIONS Setting the Alarm Time When the unit is in Power Off mode: 1. Press the MODE button once. 2. Press the TUN +/- button to set the alarm hour and VOL +/- button to set the alarm minute. [. . . ] - To switch off the Sleep Timer, press the SLEEP button repeatedly until the SLEEP indicator disappears. - To switch off the unit before the selected sleep time, press the POWER On/Off button once. - To check the current sleep time, press the SLEEP button once. 11 CARE AND MAINTENANCE - Do not subject the unit to excessive force, shock, dust or extreme temperature. - Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. [. . . ]