User manual JENSEN JMC-670

[. . . ] Unplug this apparatus during lightening storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. The product may be mounted to a wall only if recommended by the manufacturer. [. . . ] Turn on the unit and then your subwoofer. ANTENNA CONNECTION FM: Unwrap and fully extend the FM Antenna wire (22) for best reception. If stereo broadcasting is received, Stereo Indicator (#D15) will light. AM: The unit is built-in with a directional ferrite antenna, reposition the unit for best reception. POWER SUPPLY This Front Loading Dual CD System operates from AC120V~60Hz line power supply. a) Repeat current track - Press Repeat button once, the REPEAT indicator appears and current track repeated continuously. : b) Repeat Folder (MP3-CD only) - Press Repeat button until REPEAT FOLDER indicator shown on display, the selected folder will repeated continuously. 4. Press the / Button (11/H7) to adjust the minute. 5. Press MEMORY Button (7/H6) again to complete setting. : c) Repeat current disc - Press Repeat button unitil REPEATALL indicator shown on display, the current CD will repeat continuously. : COMPACT DISC OPERATIONS NOTE: This player plays not only commercial CDs but also self-complied CD-R/RW/MP3-CD discs. d) Random play - Press Repeat button until RANDOM indicator appears on display and the current disc will play randomly. BASIC DISC(s) PLAY 1. Press the Button (10/H1) to turn on the unit. 3. Place the CD(s), with label side facing outward, inside the CD compart ment. 6. The unit will scan the CD in selected CD compartments, the total number of tracks and total play time of the CD in the chosen CD location appear in the display (18). (Only Folder number and track number will shown for MP3-CD) E-9 H1 : DISC ERROR Note: If the disc is dirty, damaged or unreadable, the `NO DISC' will appear in the display. If this occurs, clean the disc, insert the disc correctly, or try another disc. H3 H5 PROGRAMMING CD TRACKS With this function you can program up to 20 titles of selected disc in the order you desire. This function can only be done in stop mode. Press the MEMORY Button to start programming tracks, "MEMORY" indicator, ` and blinks. ` appear in the display H4 H10 E-10 HX-1056M3 IB JENS 001 REV0. P65 6 7/20/2005, 2:53 PM JMC-670 INSTRUCTION MANUAL JMC-670 INSTRUCTION MANUAL 2. Select the desired track by pressing the / Button (11/H7) to select the track you want to program. 3. Press the MEMORY Button (7/H6) again to enter the selected track in program memory #1. number 4. Repeat steps 2 & 3 to program addiitonal tracks, 20 tracks can be memorized. 5. Press PLAY/PAUSE 6. To clear the programmed tracks, press STOP Button until the MEMORY indicator disappear. PROGRAMMING MP3 TRACKS With this function you can program up to 10 titles in the order you desire. This function can only be done in stop mode. ' blink, and ` ' / MEMORY 1. Press the MEMORY Button (7/H6), " FOLDER" indicator and ` indicator appears in the display. Notes on CD-R/RW Discs Because of non-standardized format definition/production of CD-R/RW/MP3-CD, playback quality and performance are not guaranteed. Manufacturer is not responsible for the playability of CD-R/RW/MP3-CD due to recording conditions such as PC performance, writing software, media ability, etc. Do not attach a label or seal to either side of the CD-R/RW/MP3-CD disc. Select the desired folder by pressing FOLDER UP or DOWN button (6/H12, &H8). The selected folder blinks. RADIO OPERATIONS RADIO TUNING 1. Press the Function Button (3/H3) to operate the unit in radio mode. 3. Press the MEMORY Button (7/H6) again to enter the selected folder. Then press (11/H7)to select your desired track. The selected track blinks. / Buttons 4. Press the MEMORY Button (7/H6) again to enter the selected track. The program number advances to ` '. 5. [. . . ] 2. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. 3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 4. If drop-outs or interruptions occur in the music during play, or if the disc fails to play at all, its bottom surface may require cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth. RESETING THE UNIT In case the unit display begins functioning erratic or random characters are displayed, use a sharp tip to press the RESET Switch (20) to reset the unit. [. . . ]