User manual JENSEN MSR180

[. . . ] Press SEL/MENU (5) repeatedly to step through the following sound adjustment options: Bass, Treble, Balance (left to right) and Fader (front to rear). when the desired option appears in the display , press VOL + or VOL - to adjust that audio feature. [. . . ] When "BEEP ON/OFF" appears in the display, press SEL/MENU two times, then press VOL + or VOL - to select USA or European spacing. To restore all factory settings, press and hold MODE (9a) until "EEP-INT" appears in the display. To reset the unit, use a ballpoint pen or other thin metal object to press the reset button (9b) under the following circumstances: after the completion of initial installation/wiring, if none of the function buttons work or if an error symbol appears in the display. Press EQ (10) to step through the following equalizer options: Flat, Jazz, Rock, Pop, Classic and Vocal. Press BAND/ENTER (11) to change between three FM bands and two AM bands. Press CH TUNE - (12a) or CH TUNE + (12b) momentarily, and the unit will automatically tune to the next strong station. Press CH TUNE - or CH TUNE + for more than three seconds to enter manual tuning mode. When "MANUAL" appears on the display, press CH TUNE - or CH TUNE + to move the radio frequency up or down one step. To automatically select six strong stations and store them in the current band, select a band (if needed) and press AS/PS (14) for more than three seconds. The six strongest stations are stored as presets, replacing any preset stations already stored in that band. Press AS/PS again to stop scanning when the desired station is reached. While in Sirius mode, navigate the three options in the user-preset channel group by momentarily pressing BAND/ENTER (16). [. . . ] When the desired channel is found, press BAND/ENTER to confirm and the "SKIP" icon will flash in the display. When finished, pressSHIFT/SCAN to return to normal mode, or the unit will automatically revert to normal in 10 seconds. [. . . ]