User manual JENSEN SCR-68A

[. . . ] if the installation requires the drilling of holes or other vehicle modifications , consult the nearest dealer for assistance. Before completing installation of the unit, connect the wiring temporarily to ensure that the unit operates properly in the selected mounting location. Before you begin, turn off the vehicle ignition and disconnect the battery negative terminal. Remove the two screws from the top of the unit, and seal the holes with the plastic film provided to ensure that no water is able to enter the unit. [. . . ] Remove outer trim ring, and insert the supplied removal keys as far as they will go (notches facing up) into the slots at the middle left 2 and right sides of the unit. Turn the ignition off, and disconnect the cable from the battery's negative (-) terminal. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, and pull the unit out of the dashboard. WIRING CHART Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Wire Color Grey/Black Grey Violet Violet/Black Empty Green Green/Black Empty Black/Shield Red White White/Blackr Empty Blue Red Black Empty Empty Empty White Description Right front speaker (-) Right front speaker (+) Right rear speaker (+) Right reart speaker (-) No connection Left rear speaker (+) Left rear speaker (-) No connection Line level ground Right rear line level output Left front speaker (+) Left front speaker (-) No connection Power Antenna +12V Power Ground No connection No connection No connection Rear left line level output Press the power button (1) or any other button on the front of the radio (except the eject button) to turn the unit on. Press SEL/MENU (5) repeatedly to step through the following sound adjustment options: Volume, Bass, Treble, Balance (left to right) and Fader (front to rear). when the desired option appears in the display , press VOL or VOL to adjust that audio feature. When no adjustments have been made for five seconds, the unit will resume normal operation. Press SEL/MENU (6) for more than three seconds to access the menu feature. Once this feature is activated, press SEL/MENU momentarily to step though the available menu options. To automatically select six strong stations and store them in the current band, select a band (if needed) and press AMS (13) for more than three seconds. Six strong stations are stored as presets, replacing any preset stations already stored in that band. Press CHANNEL << (18a) or CHANNEL >> (18b) momentarily to advance to the next or previous track on the CD. Press and hold CHANNEL << or CHANNEL >> to fast forward or fast reverse through the disc. Press and hold SCN (19) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. Press and hold RPT (20) for more than three seconds during disc play to continuously repeat the selected track. Press and hold SHF (21) for more than three seconds during disc play to play all tracks on a CD in random, shuffled order. Refer to the owner's manual included with the CD changer for instructions on installing, loading and using the CD magazine. When accessing CDC mode, disc play will begin with the first CD that the unit detects, and the disc and track numbers will be shown in the display. [. . . ] When accessing CDC mode, disc play will begin with the first CD that the unit detects, and the disc and track numbers will be shown in the display. To select the desired disc for play, press SHIFT (22a) to enter shift mode, and press CHANNEL << or CHANNEL >> select the previous or next disc. As an alternate method, press DISC(22b) to move to the previous disc and DISC+ (22c) to move to the next disc. Pause, Track Select, Repeat, Random Shuffle and Preview Scan features during CDC operation are accessed using the same methods as for regular disc play. [. . . ]