User manual JENSEN VOYAGER MCD6115

[. . . ] We've tried to make the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all of the features of your new JENSEN marine stereo for maximum enjoyment. Using the mounting template supplied with the unit, determine the mounting location in the dashboard. [. . . ] Last State Memory In radio and CD mode, when the ACC and MEM wires are disconnected, the unit will store the last information (volume level, current station, preset memory location, CD track number and where stopped, etc. When the wires are reconnected, these settings will automatically be recalled. To activate manual tuning, press << (10) or >> (11) for more than three seconds until "MAN" appears in the display. press and hold << or >> to quickly advance to the desired frequency. Five seconds after any button is pressed, manual tuning will expire and revert to seek tuning. Press AS/PS again to stop scanning when the desired station is reached. Press << (10) or >> (11) for less than one second to automatically seek the next strong station. To automatically program the six strongest stations in the current frequency, press and hold the AS/PS button for more than three seconds. The new stations replace stations already stored in the preset numbers for that band. NOAA Weather Radio broadcasts National Weather Service warnings, watches, forecasts and other hazard information 24 hours a day. Press the BAND button and the >> (11) button simultaneously again to change the Frequency back to U. Use preset buttons 1-7 (12-18) or the << (10) and >> (11) buttons to select the corresponding weather channel. Intro (Preview all Tracks) Press 6 INT for more than three seconds to play first ten seconds of each track on current CD. Press 6 INT again for more than three seconds to stop intro and listen to track. [. . . ] La alimentación no va a la unidad Ninguno de los altoparlantes funciona (las luces del visualizador funcionan) No todos los altoparlantes funcionan Does not operate (display No power to yellow wire does not light) No power to red wire Inline fuse blown No power to unit No speakers operate Inline fuse blown Speaker harness not connected Incorrect splices or connections Speaker wires shorting to Check splices and chassis ground or to each connections. Other Blows fuses Power wire shorting to ground Make sure wire is not pinched. Incorrect fuse/fuse too small CD skips too much Receiver mount is not solid or backstrap is not secure Install fuse of correct rating. [. . . ]