User manual JENSEN VOYAGER MP5000

[. . . ] This button is also used to access the Loudness function; press and hold MUTE to toggle the Loudness function on and off. 3. Liquid Crystal Display (LCD) The liquid crystal display (LCD) panel (3) displays the frequency, time and activated functions. Note: When subjected to cold temperatures for an extended period of time, LCD panels will take longer to illuminate and the display visibility may slightly decrease. [. . . ] Select a Band Press AM/FM (10) momentarily to directly access tuner mode from any other function mode. When the unit is already in tuner mode, briefly press AM/FM to change between two AM bands (AM1 and AM2) and three FM bands (FM1, FM2 and FM3). 11. Tuning Manual Tuning Briefly press TUN/TRK UP or DN (11) to tune the frequency one step higher or lower. Seek Tuning Press and hold TUN/TRK UP or DN to automatically tune up or down to the next strong station. Tuner Operation PUSH ON/OFF VOL LOUD AUD A B C MUTE AUX JENSEN MEDIA PRO 5000 + SPEAKER 11 UP TUN/ TRK DN ON/OFF ALARM SET CD-RW MP 3 AS/PS T/F 10 AM/FM 1 2 3 4 5 6 13 ENTER INT RPT RDM STOP LANG MENU DVD DVD/CD/MP3 PLAYER AUX A/V IN 12 7 12. Preset Stations Store Preset Stations Six numbered preset buttons (12) store and recall stations for each AM and FM band. The current station will be stored, and the corresponding preset number will appear in the display. Recall Preset Stations To recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to the corresponding stored station. 13. Automatically Store / Preset Scan (AS/PS) Automatically Store Press AS/PS (13) for more than three seconds, and the unit will automatically scan for and store the six strongest stations in the current band. To stop this function before the automatic storing is complete, briefly press AS/PS again. Preset Scan Briefly press AS/PS to scan all preset stations in the current band. The unit will play each station for five seconds before moving on to the next station. To stop this function before the scan is complete, briefly press AS/PS again. 8 MP5000 CD Operation 14. Insert and Eject CD Insert CD Insert a CD label-side up into the CD slot (14a), and the disc will begin to play. Eject CD Press the eject button (14b) to stop CD play and eject the CD. 15. Pause Press the play/pause button (15) to suspend and resume disc play. 16. Track Select Briefly rotate the TUN/TRK knob (16) o advance to the next or previous track on the CD. Rotate the TUN/TRK knob for more than three seconds to fast forward or fast reverse through the disc. CD play starts when the play/pause button is pressed. CD & DVD Operation PUSH ON/OFF VOL LOUD AUD A B C MUTE AUX JENSEN MEDIA PRO 5000 + SPEAKER 16 UP TUN/ TRK DN ON/OFF ALARM SET CD-RW MP 3 AS/PS T/F AM/FM 1 2 3 4 5 6 14a ENTER INT RPT RDM STOP LANG MENU DVD DVD/CD/MP3 PLAYER AUX A/V IN 22 15 17 18 14b 19 20 23 21 9 17. Intro Scan (INT) Press and hold INT(17) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. [. . . ] Contrast: Adjust the contrast of the screen from the following levels: 6, 4, 2, 0, -2, -4 or -6. Hue: Adjust the hue of the screen from the following levels: 6, 4, 2, 0, -2, - 4 or - 6. Saturation: Adjust the saturation of the screen from the following levels: 12, 10, 8, 6, 4, 2 or 0. [. . . ]