User manual JENSEN VOYAGER VOM-78

[. . . ] · Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by placing it on bedding or carpeting. SAFETY INFORMATION · When connecting or disconnecting the AC cord, grip the plug and not the cord itself. · When you are not going to use the unit for a long period of time, disconnect the AC cord. CONDENSATION INFORMATION · When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning the power on, or gradually heat the room and let the unit dry before use. FCC INFORMATION WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could avoid the user authority to operate the equipment. [. . . ] EXIT Button Press to return to previous menu or exit the menu and return directly to normal viewing. STANDBY Button Press to turn ON the unit or put it in STANDBY (OFF) mode. SOUND Button Press to select from preset sound settings (Personal, Standard, Voice, Music, Theater) to match the type of show you are watching. MTS Button Press to select MONO sound, STEREO sound and Secondary Audio Program (SAP). FORMAT Button Press to select the picture format. 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 1) 2) 3) 4) SLEEP Button Press to set the SLEEP timer. The unit will remain on for the time that is set, and will automatically shut off afterwards. LAST CH Button Press to switch repeatedly between the last two channels displayed. PICTURE Button Press to select from preset screen display settings to match the type of show you are watching (Standard, Dynamic, Personal, Soft & Movie) 6 18) PLV36190CS1_IB_ENG_JEN_R1. pmd 6 11/2/2007, 5:09 PM UNIT REFERENCE GUIDE 1) Color LCD Screen 2) STANDBY Indicator Indicates whether the unit is ON or in STANDBY (OFF) mode. REMOTE CONTROL SENSOR Do not block this sensor or remote control will not work. 3) Removable Base Stand 4) STANDBY/ON Button Turns the unit on and off. 7) ­ VOL + Controls Adjusts the volume level and highlight selections (Left & Right) on the menu screen. · The car power adapter included with this unit is for its use only. · In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle. · Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event of an accident. · When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. · After use, disconnect the car power adapter from both the unit and cigarette lighter socket. USING THE AC POWER ADAPTER · The supplied AC power adapter operates on AC 120V. · Press the STANDBY/ON button on the top of the unit or remote control to turn on the unit. Note: · The AC power adapter included with this unit is for its use only. · Be sure the AC power adapter is disconnected and all functions are off before making connections. · To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert. · When you are not going to use the unit for a long period of time, disconnect the power adapter. 13 PLV36190CS1_IB_ENG_JEN_R1. pmd 13 11/2/2007, 5:19 PM INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. [. . . ] Auto to number number number number When you set the `Time', the option will be shown: · Time Update : Select On/Off to activate the following manual settings; Select synchronize time with the digital TV channel signal. · Date : Press the or button to locate the position, and press the buttons to input date. or button to locate the position, and press the · Time : Press the buttons to input time. · Power On Time : Press the or button to locate the position, and press the buttons to input power on time. [. . . ]