Detailed instructions for use are in the User's Guide.
[. . . ] CD-RECEIVER
KDC-W5641U KDC-W5541U KDC-W5141U KDC-W5041U KDC-W4141 KDC-W4041
INSTRUCTION MANUAL
© B64-3958-00/00 (EW/E2W)
Contents
Before use Basic Operation
General functions Tuner functions Disc & Audio file play functions
3 4
Appendix
15
Accessories/ Installation Procedure 18 Connecting Wires to Terminals Installation/Removing the Unit 19 21 22 24
General Operation
Audio Control Audio Setup Speaker Setting Display Switching
6
Troubleshooting Guide Specifications
Tuner Operation
PTY (Program Type) Program Type preset Changing Language for PTY Function Direct Access Tuning
8
Music disc/Audio file Operation
Play Functions of Disc Changer Direct Music Search Direct Disc Search List Select iPod Select Track Select
9
Menu Operation
Menu System Security Code Manual Clock Adjustment Auxiliary Input Display Setting Demonstration mode Setting
11
Basic Operations of remote control 14
Panel illustrations used in this document
The control panel for KDC-W5641U is used to describe operations in this document.
Playing AAC, MP3, and WMA data
This document refers to AAC, MP3, and WMA data stored in iPod, USB device, and CD-R/RW as "audio files. " Refer to the section on "Audio Files" to control these data. See <About Audio file> (page 15) for details.
· iPod is a trademark of Apple Inc. , registered in the U. S. · The "AAC" logo is trademark of Dolby Laboratories.
2|
KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041
Before use
2WARNING
To prevent injury or fire, take the following precautions:
· To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If you experience problems during installation, consult your Kenwood dealer. [. . . ] After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code.
/
· When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package.
Number of times the incorrect code was input 1 2 3 4
Input prohibited time -- 5 minutes 1 hour 24 hours
1 Select Security Code item during Menu mode
Select the "SECURITY SET" display. For how to select menu items, refer to <Menu System>(page 11).
Manual Clock Adjustment 1 Select Clock Adjustment item during Menu
mode Select the "CLOCK ADJUST" display. For how to select menu items, refer to <Menu System>(page 11).
2 Enter Security Code mode
Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed.
3 Select the digits to enter
Push the Control knob towards right or left.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second. The clock display blinks.
4 Select the Security Code numbers
Push the Control knob towards up or down.
5 Repeat steps 3 and 4, and complete the
Security Code.
3 Adjust the time
Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes.
6 Confirm the Security Code
Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed.
4 Exit Clock adjustment mode
Press the [M. JOG] button.
7 Do the step 3 through 6 step operation, and
reenter the security code. The Security Code function activates.
/
· You can do this adjustment when the "SYNC" is set as "OFF".
/
· If you enter a Code different from your Security Code, you have to start over from step 3.
8 Exit Security Code mode
Press the [M. JOG] button.
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.
1 Turn the power ON. 2 Do the step 3 through 6 step operation, and
reenter the security code. "APPROVED" is displayed.
/
· If an incorrect code is entered, "WAITING" is displayed,
12 |
KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041
Auxiliary Input Display Setting
Selects the display below when changing to Auxiliary input source; · "AUX" · "DVD" · "PORTABLE" · "GAME" · "VIDEO" · "TV"
1 Select Auxiliary input display setting item
during Menu mode Select the "NAME SET" display. For how to select menu items, refer to <Menu System>(page 11).
2 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.
3 Select the Auxiliary input display
Push the Control knob towards right or left.
4 Exit Auxiliary input display setting mode
Press the [M. JOG] button.
/
· When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. · The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, "AUX EXT" is displayed by default.
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the "DEMO MODE" display. For how to select menu items, refer to <Menu System>(page 11).
2 Set the Demonstration mode
Press the Control knob for at least 2 second. Pressing this button for 2 seconds or longer toggles the setting between "ON" and "OFF".
3 Exit Demonstration mode
Press the [M. JOG] button.
English |
13
Accessory of KDC-W5641U/KDC-W5141U/KDC-W4141
Basic Operations of remote control
In Tuner source
VOL SRC
SRC
ATT
ATT VOL
Band select Station select
[FM]/[AM] [4]/[¢] [1] -- [6]
AUD
AUD
FM/AM
Recall preset stations
DIRECT
*2-ZONE
0--9
In CD/USB source
Music select Folder/Disc select [4]/[¢] [FM]/[AM]
*
Pause/Play *KDC-W5641U/W5141U only [38]
/
About [ ] This button is used when Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX.
General control
Volume control Source select [VOL] [SRC]
¤
· Do not set the remote control in hot places such as on the dashboard.
Volume reduce [ATT] When the button is pressed again, the volume returns to the previous level. When the volume is reduced, the "ATT" indicator flashes.
Loading and Replacing battery
Use two "AA"/ "R6"-size batteries. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
In Audio control
Audio item select Adjusts the Audio item [AUD] [VOL]
/
· Refer to <Audio Control> (page 6) for the operation method, such as the procedures for Audio control and others operations.
Dual Zone control
Dual zone system on and off Rear channel volume control [2-ZONE] [5]/ []
14 |
KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041
Appendix
About Audio file
· Playable Audio file AAC-LC (. m4a), MP3 (. mp3), WMA (. wma) · Playable disc media CD-R/RW/ROM · Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. · USB device Playable Model KDC-W5641U, KDC-W5541U, KDC-W5141U, KDC-W5041U · Playable USB device USB mass storage class · Playable USB device file system FAT16, FAT32 · iPod Playable Model KDC-W5641U, KDC-W5541U Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. · Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from to .
CD (
About USB device
· If you start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, "RESUMING" is displayed without displaying a folder name, etc. [. . . ] If the unit is unstable, it may malfunction (for example, the sound may skip).
Removing the Unit 1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2 Remove the screw (M4 × 8) on the back panel. 3 Insert the two removal tools deeply into the slots
on each side, as shown.
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards the inside.
Screw (M4X8) (commercially available) Accessory2
¤
· Be careful to avoid injury from the catch pins on the removal tool.
5 Pull the unit all the way out with your hands, being
careful not to drop it.
English |
21
Troubleshooting Guide
Some functions of this unit may be disabled by some settings made on this unit.
Audio file source
?
!
· Cannot set up the subwoofer. "SWPRE" of <Menu System> (page 11) · "Subwoofer output" of <Basic Operation> (page 4) is not set to On. <Audio Setup> (page 6) · Cannot select the output destination of the subsource in the Dual zone. [. . . ]