User manual KENWOOD KRF-V8060D

[. . . ] AUDIO VIDEO SURROUND RECEIVER KRF-V8060D VR-6060 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. SL S SB SR · Selecting "6CH INPUT" by pressing the INPUT MODE key, whereby "DVD/6CH" is the input source will cause SPEAKERS A to be selected automatically. 22 EN Normal playback Listening to a source component VOLUME CONTROL Adjusting the sound SPEAKER EQ ACTIVE EQ A SPEAKERS B TONE MULTI CONTROL Input Selector AV AUX PHONES LOUDNESS MUTE VOLUME CONTROL POWER VOLUME / MUTE ACTIVE EQ SPEAKER EQ VOLUME / Joystick (MULTI CONTROL 5 / , DOWN 2 / UP3) INPUT SELECTOR LOUDNESS TONE BASS BOOST 1 Use the Input Selector and AV AUX keys to select the source you want to listen to. 1 2 3 4 5 6 7 8 9 "DVD/6CH" "CD/DVD" "PHONO" "TUNER" "VIDEO 1" "VIDEO 2" "VIDEO 3" "MD/TAPE" "AV AUX" Selecting a source using each key. Adjusting the TONE You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 2 Use the MULTI CONTROL knob or Joystick (5/) to select TONE ON/OFF. SP L C SW R LFE AB MUTE CLIP COAXIAL DTS. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED SL S SB SR 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME +/- keys to adjust the volume. 3 When in TONE ON selection, press the TONE key for the following displays. 4 Use the MULTI CONTROL knob or Joystick (5/) to adjust the sound quality. SP L C SW R LFE AB MUTE CLIP COAXIAL DTS. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED SL S SB SR · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. · The adjustment item is displayed for approximately 8 seconds. Once-touch low frequency emphasis (BASS BOOST) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. · Press the key once to select the maximum (+10) low frequency emphasis setting. · This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. Switching back to the previous setting Press the BASS BOOST key again. 23 EN Normal playback Adjusting the LOUDNESS mode You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the LOUDNESS setting ON. Listening with headphones 1 Press the A and B Speaker keys so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. SP MUTE CLIP AB LFE COAXIAL OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DSP MODE D ANALOG 96kHzfs To cancel Press the LOUDNESS key again so that the "LOUDNESS" indicator goes off. SL S SB SR · If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. SP L C SW R LFE AB MUTE CLIP COAXIAL OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DSP MODE D ANALOG 96kHzfs SL S SB SR Blinks To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing VOLUME +/­ keys. 3 Use the VOLUME CONTROL knob or VOLUME +/­ keys to adjust the volume. ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode. Press the ACTIVE EQ key for the following selections; : Effective when listening to music. (The ACTIVE EQ indicator lights up. ) 2 ACTIVE EQ CINEMA : Effective when watching a movie. (The ACTIVE EQ indicator lights up. ) 3 ACTIVE EQ TV : Effective when watching TV. (The ACTIVE EQ indicator lights up. ) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ indicator goes off. ) · "ACTIVE EQ" will scroll from right to left. [. . . ] ±10 dB (at 10 kHz) 42 EN Specifications DIGITAL AUDIO section Sampling frequency . . . . . . . . . . . . . . . . . . . . . . 32 kHz, 44. 1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical . . . . . . . . . . . . . . . . . . . . . . . . . . . (­15 dBm ~ ­24 dBm), 660 nm ±30 nm Coaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5 Vp-p / 75 AM tuner section Tuning frequency range 10 kHz step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]