User manual KENWOOD TM-V7

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD TM-V7. We hope that this KENWOOD TM-V7 user guide will be useful to you.


KENWOOD TM-V7 : Download the complete user guide (2552 Ko)

Manual abstract: user guide KENWOOD TM-V7

Detailed instructions for use are in the User's Guide.

[. . . ] 144/440 MHz FM DUAL BANDER TM-V7A TM-V7A TM-V7E 144/430 MHz FM DUAL BANDER 144/430 MHz FM DUAL BANDER INSTRUCTION MANUAL KENWOOD CORPORATION © B62-0678-20 (K, E, M) 09 08 07 06 05 04 03 02 THANK YOU! We are grateful you decided to purchase this KENWOOD FM transceiver. This series of mobile transceivers were developed to satisfy the requirement for a compact rig that’s simple to operate yet contains numerous sophisticated features. The dual band operation will be appreciated by hams who want access to VHF and UHF bands with a transceiver smaller than some single banders. KENWOOD believes that the compact size coupled with the reasonable cost will guarantee your satisfaction with this product. FEATURES • Enhanced Programmable Memory (PM) channels store virtually entire current operating environments for your quick recall. [. . . ] 1 (Visual Scan). Mode 2 (49 ch) 9 VOL SQL 10 11 12 13 14 15 2 1 4 Press [SET] to select 25, 49, 73, or 147. Cursor Frequency channel Move the cursor to this position to receive this signal. • The default is 49. 5 Press [MNU] to exit Menu mode. Mode 4 (147 ch) 7 6 5 4 3 2 1 16 17 18 19 20 21 41 s Using Visual Scan 1 2 3 4 5 6 7 8 9 10 11 12 13 14 • 15 16 17 18 19 20 21 • 1 Select the desired band. 2 Turn the Tuning control, or press Mic [UP]/[DWN], to select the operating frequency. • This frequency will also be used as the center frequency. 3 Press [F], [VISUAL] to start Visual Scan. Press [PAUSE] again to resume. Note: x If you start Visual Scan in Memory Recall mode, the memory channel frequencies will be scanned. x If you start Visual Scan after recalling the Call channel, the call channel frequency will be used as the center frequency. x If you start Visual Scan in one of the following conditions, you cannot receive in the current operating frequency. • Memory Recall or Call Channel mode • The VHF band, VFO mode, and a frequency in the range 118 MHz to 136 MHz were selected. x Depending on conditions, Visual Scan and the conventional S-meter may indicate different signal strength levels. 4 To change the operating frequency, turn the Tuning control or press Mic [UP]/[DWN]. • The displayed frequency changes and the cursor moves. Press [SET] to use the changed operating frequency as the center frequency. Press [RESET] to restore the previous operating frequency. 5 To quit Visual Scan, press [OFF]. 42 SCAN RESUME METHODS Before using Scans other than Visual Scan, it’s necessary to decide under what condition you want your transceiver to continue scanning after detecting and stopping for a signal. The default is Time-Operated mode. • Time-Operated mode Your transceiver stops scanning after detecting a signal, remains there for approximately 5 seconds, and then continues to scan even if the signal is still present. • Carrier-Operated mode Your transceiver stops scanning after detecting a signal and remains on the same frequency until the signal drops out. There is a 2 second delay between signal drop-out and scan resumption to allow time for any responding stations to begin transmitting. Note: x Turning the Tuning control clockwise, or pressing Mic [UP] after a signal that has stopped Scan drops out, causes scanning to resume immediately upward. x Turning the Tuning control counterclockwise, or pressing Mic [DWN] after a signal that has stopped Scan drops out, causes scanning to resume immediately downward. s Selecting Scan Resume Method 1 Select the desired band. 8 (Scan Resume). CALL PWR 1 2 3 4 5 6 VOL SQL 7 8 4 Press [SET] to toggle Time-Operated or Carrier-Operated. 5 Press [MNU] again to exit Menu mode. 9 10 11 12 13 14 15 16 17 18 19 20 21 43 VFO SCAN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 • MEMORY SCAN Memory Scan allows all memory channels containing data to be scanned. 2 Press [MR] (1 s). • • The 1 MHz decimal blinks while scanning is in progress. Scan starts with the channel last recalled. VFO Scan allows you to scan all frequencies from the lowest frequency to the highest frequency on the band. 2 Press [VFO] (1 s). • • The 1 MHz decimal blinks while scanning is in progress. Scan starts at the frequency currently displayed. 3 To reverse the scan direction, turn the Tuning control or press Mic [UP]/[DWN]. • Upward scan: Turn the Tuning control clockwise or press Mic [UP]. Downward scan: Turn the Tuning control counterclockwise or press Mic [DWN]. 3 To reverse the scan direction, turn the Tuning control or press microphone [UP]/[DWN]. • • Upward scan: Turn the Tuning control clockwise or press Mic [UP]. Downward scan: Turn the Tuning control counterclockwise or press Mic [DWN]. 4 To quit VFO Scan, press [BAND SEL] for the band being scanned or [VFO]. • When scanning the TX band, you can also press Mic [PTT] to quit Scan. 4 To quit Memory Scan, press [BAND SEL] for the band being scanned or [MR]. • When scanning the TX band, you can also press Mic [PTT] to quit Scan. Note: The squelch must be closed for Scan to function. Note: x At least 2 or more memory channels must contain data and must not be locked out. [. . . ] rear of the front panel, then lock the front panel securely to the main unit by using the same switch. 88 4 Connect the connectorized cable correctly. 84 3, 4 Continued Problem The way the transceiver functions or displays information is strange. The display is too dim, even though you selected a high dimmer level. Probable Cause The electrical contacts on the front panel and main unit were soiled. The supply voltage is too low. Corrective Action Clean the electrical contacts on both the front panel and the main unit using a clean damp cloth. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD TM-V7




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD TM-V7 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.