User manual KENWOOD X700-5

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD X700-5. We hope that this KENWOOD X700-5 user guide will be useful to you.


KENWOOD X700-5 : Download the complete user guide (1953 Ko)

Manual abstract: user guide KENWOOD X700-5

Detailed instructions for use are in the User's Guide.

[. . . ] Using a fuse with the wrong rating may cause your unit to malfunction. € To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. NOTE • If you experience problems during installation, consult your Kenwood dealer. € If the unit does not seem to be working right, consult your Kenwood dealer. [. . . ] Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model X700-5 Serial number Do not wipe the panel with a hard cloth or a cloth dampened by volatile solvents such as paint thinner and 4Ω alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. Com © 2011 JVC KENWOOD Corporation B64-4905-00/00 (KV) When the unit is used in the ACC ON position without 4Ω turning the engine ON, it depletes the battery. Combined impedance Impédance combinée Impedancia combinada Installation / Installation / Instalación 7 Accessories / Accessoires / Accesorios 1 2 Self-tapping screws / Vis taraudeuses / Tornillo ø 4 x 16 mm autorroscantes Hexagon wrench / Clé polygonale / Llave hexagonal Connection / Raccordements / Conexiones 4 1 Since there are large variety of settings and connections possible according to applications, read the instruction manual well to select the proper setting and connection. Remove the ignition key and disconnect the negative · Terminal of the battery to prevent short circuits. Connect the power wire, power control wire and grounding wire following this order. ATTENTION 7 Procédure d'installation 7 Procedimiento de instalación 2 Parts included  Pieces comprises Partes incluidas 1  arts included P Pieces comprises Partes incluidas Dressing cover Enjoliveur Cubierta de adorno Installation board, etc. (grosor: 15 mm o más) • Do not install in the below locations; (Unstable location, In a location that interferes with driving, In a location that gets wet, In a dusty location, In a place that gets hot, In a place that gets direct sunlight, In a location that gets hit by hot air) • Do not install the unit under the carpet. € Install this unit in a location which allows heat to easily dissipate. € The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it. Do not mount the unit in a place where the cooling fan and ducts of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction. € When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe, or wiring harness, and be careful not to cause scratches or other damage. € Do not install near the dashboard, rear tray, or air bag safety parts. € The installation to the vehicle should securely fasten the unit to a place in which it will not obstruct driving. If the unit comes off due to a shock and hits a person or safety part, it may cause injury or an accident. € After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally. PRECAUCIÓN Remove the ignition key and disconnect the negative · Terminal of the battery to prevent short circuits. € If the fuse blows, check wires for shorts, then replace the PRECAUCIÓN fuse with one of the same rating. CAUTION Particular attention must be given to making good electrical contact at the amplifier-output and speaker terminals. [. . . ] This unit is compatible with a large variety of systems by combining the switches and functions described in the following. 1 Fuse (40 A x 2) NOTE If you can’t find the specified capacity fuse at your store etc. Ch) • Stereo connections: When you wish to use the unit as a stereo amplifier, stereo connections are used. The speakers to be connected should have an impedance of 2Ω or greater. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD X700-5




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD X700-5 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.