User manual KENWOOD XD-951

[. . . ] COMPONENT SYSTEM/COMPACT HI-FI SYSTEM XD-951 XD-A900 XD-A700 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. ^ COMPACT DIGITAL AUDIO B60-3907-00 01 MA MC (E2, Q, M, X, Y, K, P) 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. XD-951/A900/A700 (En) U. S. A. and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ÷ When the transmission of the selected program contents ends in case of automatic reception with the EON function, return will be made to the status directly before operation of the EON function. When tape or CD playback has been interrupted, it will be continued from the point of interruption. Preparation section Waiting for information while a RDS station without EON function is tuned If the EON indicator does not light with the RDS station in steps 3 and 4, the tuner will wait for only the desired information broadcast from the tuned RDS station provided that the desired information has been selected in the previous step. TP (Traffic Program) indicator Basic section Application section Knowledge sections The lighting of the TP indicator indicates that the currently tuned station or a station in the same network as it broadcasts traffic announcement programs. If the TP indicator already lights with the current station, you can listen to the traffic announcement program through the station without making reservation with the EON function. 42 Convenient CD recording XD-951/A900/A700 (En) Selection of the convenient CD recording type With this unit, the following edit recording is possible according to the purpose. Note Note that this cassette deck cannot record onto Metal tapes. Preparation section If you want to select the track to be recorded while playing a CD \ Recording only desired titles (CD ONE TRACK RECORD) e Perform this operation when a track you want to record starts during CD playback. This starts recording of the track from the beginning. If you want to record a CD in order of track numbers \ Recording of an entire CD (CD RECORD) r Perform the CD RECORD operation while the CD player is in stop mode to start recording. Application section If you want to avoid any tune being interrupted at the end of tape \ Giving preference to the tape length over the title sequence (CD EDIT) t Edit recording of CD is possible by the simple operation of entering the recording length of the tape. Recording the programmed titles (CD PGM RECORD) Knowledge sections If you want to record only the desired tracks \ y Program the desired tracks from up to 3 CD discs in the desired order and record the programmed playback onto tape. Convenient CD recording XD-951/A900/A700 (En) 43 Recording only desired titles (CD ONE TRACK RECORD) At the time of CD playback, any desired title can be selected immediately for recording. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1 to 3) 1 Playback of CD. Select a mode other than random play. Lights Preparation section 6 CD 03 123 0 12 2 Press the DUBBING key. In case the key is pressed with track No. 3 DUBBING CD 03 123 0 12 Basic section 3 Select "CD ONE TRACK RECORD". MULTI CONTROL CD ONE TRACK RECORD CD RECORD CD EDIT CD PGM RECORD Application section CD O NE T R A 4 Start recording. Press the ENTER key. ENTER | Scrolled display (CD ONE TRACK RECORD) ÷ Playback restarts from the beginning of the track being played and recording starts at the same time. To end recording in the middle Knowledge sections When recording has been completed, a non-recorded portion of 4 seconds will be produced and the cassette deck part will stop. To record a different track, repeat the steps 1 to 4. 7 ÷ Both the cassette deck and CD player stop. 44 Convenient CD recording XD-951/A900/A700 (En) Recording of an entire CD (CD RECORD) Perform the following operation while the CD player is in stop mode to start recording at the same time as the start of playback. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1to 3) (For the reverse mode, select " p" (two-way recording). ) Preparation section 1 Press the DUBBING key. DUBBING 2 Select "CD RECORD". 1 Select. MULTI CONTROL 2 Press SET. SET CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) 3 Select the disc. MULTI CONTROL CD R EC OR D Application section DIsC 2 4 Start recording. Press the ENTER Key. ENTER ÷ Recording of CD starts at the same time as playback. ÷ At the end of tape, the music is not recorded on the leader tape portion. If you do not want any music to be interrupted in the middle, refer to "Recording" and start recording of side B with the interrupted track. · Knowledge sections To end recording in the middle 7 ÷ Both the cassette deck and CD player stop. Convenient CD recording XD-951/A900/A700 (En) 45 Giving preference to the tape length over the title sequence (CD EDIT) When the tape recording time is specified, recording is executed with changing the title sequence so that no title will be interrupted when the tape direction is changed at the end of one side. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1 to 3) (For the reverse mode, select " p" (two-way recording). ) 1 Press the DUBBING key. DUBBING Preparation section 2 Select "CD EDIT" and press the SET key. 1 2 MULTI CONTROL SET 3 Select a disc and press the SET key. 1 2 MULTI CONTROL CD ONE TRACK RECORD (Only during CD playback) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) CD E DI T Basic section SET DIsC 2 ÷ Even if the disc has already been selected, select the disc again. 4 Set the tape length (recording time) and press the ENTER key. 1 2 MULTI CONTROL Application section C-60 Automatic editing of tape sides A and B ENTER ENTER 5 Start edit recording. Press the ENTER Key. EDIT A T 01 123 Knowledge sections ENTER ÷ The tape and CD stop automatically when recording has completed. ÷ Press the stop (7) key to stop recording in the middle. Press the CD PGM key twice to cancel CD EDIT. ÷ If you commit an error in the time entry, restart the procedure from step 1. Note Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption of a title may not be avoidable. In such a case, the respective title will not be recorded. 46 Convenient CD recording XD-951/A900/A700 (En) Recording the programmed titles (CD PGM RECORD) Program the desired tracks from up to 3 CD discs in the desired order and record the programmed playback onto tape. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1 to 3) Preparation section 1 Press the DUBBING key. DUBBING 2 Select "CD PGM RECORD". 1 Select. MULTI CONTROL 2 Press SET. SET CD ONE TRACK RECORD (Only during CD playback) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) 3 Program the desired tracks. 1 Select tracks in the order you want to play them. (Perform step 3 on page 32. ) CD P GM R E C | Scrolled display (CD PGM RECORD) Application section 2 Check, replace, add or delete the programmed tracks as required. (Perform step 4 on page 33. ) 4 Start recording. Press the ENTER Key. To end recording in the middle Knowledge sections ENTER 7 Effective Sound Adjustment XD-951/A900/A700 (En) 47 This unit permits selection of equalizer and sound field playback. Select the sound field mode according to the desired atmosphere. Adjustment of balance and input level Balance. . . . . . . . . . . Input level. . . . . . . Adjusts the volume of external equipment (video deck etc. ) connected to the AUX terminal. Please adjust as required when the volume from external equipment is too high etc. Balance adjustment : 1 Press the MODE/DEMO key. MODE /DEMO Preparation section 2 Select "L/R BALANCE". 1 Select. MULTI CONTROL 2 Press SET. SRS LEVEL S. W. (Except for the XD-A700) L/R BALANCE | Scrolled display (L/R BALANCE) Basic section SET L/ R BA LA N C ÷ When SRS 3D is ON, "SRS LEVEL" (strength of the 3D effect) also is displayed. 3 Adjust. 1 Adjust. MULTI CONTROL Application section Indicates the center The right volume is decreased. 2 Press the ENTER key. ENTER The left volume is decreased. L - - y- -R Indicates the balance setting Knowledge sections Input level adjustment : Rear panel AUX INPUT LEVEL + + AUX INPUT LEVEL AUX INPUT LEVEL Adjusts the volume of external equipment (video deck etc. ) connected to the AUX terminal. [. . . ] Bass-reflex type Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 mm, cone type Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 mm, cone type Super-tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm, dome type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]