User manual KOMPERNASS FLORABEST KH 4234 HOSE TROLLEY

[. . . ] 6 - KH 3127: Rated voltage: 9, 6 V Rated speed: 860 rpm Sound pressure level: 72, 4 dB (A) Sound power level: 83, 4 dB (A) Integrated NI-CD rechargeable battery: Rated capacity: 1. 6 - 01: Primary Rated voltage: Rated power consumption: Secondary Rated voltage: Rated power consumption: Protection class: Your working area A) Keep your working area clean and clutter-free. B) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. [. . . ] Do not use an adapter plug with devices fitted with a protective earth. unmodified plugs and matching sockets reduce the risk of electric shock. B) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. Do not use the mains lead for any purpose for which it was not intended, e. To carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) When not in use always ensure that electrical power tools are kept out of reach of children. M aintenance and cleaning must only be carried out when the tool is switched off and the battery charger is disconnected from the mains power. N ever under any circumstances charge the integrated rechargeable battery with the battery charger if damaged. o nly use the original battery charger to charge the integrated battery. B efore connecting the battery charger to the mains power, make sure that the mains current is 230 V ~ 50 Hz and is equipped with a 16 A fuse in accordance with requirements. How to avoid injury: Use the following safety gear when operating the tool: Wear safety goggles, worker safety boots and protective gloves. J nly remove workpieces when the saw blade O has come to a complete standstill. J revent the saw blade 7 from coming into P contact and / or colliding with stones, metal, or similar materials. J Switch off the device immediately (by releasing the On / Off switch 4 ): - If you strike any foreign body (e. This prevents the "memory effect" (loss of capacity as a result of charging when only partially discharged). The heat generated by the charger while operating can lead to a build-up of heat!Never have the charger 11 connected to the device while you are sawing. [. . . ] The battery initially requires about 4 - 5 charging cycles before it achieves its maximum capacity. Starting the charging process j nsert the plug 13 into the charging socket 2 . The starting lock 1 prevents your branch cutter from being switched on unintentionally. J Danger: Only carry out maintenance and cleaning when the tool is switched off and the battery charger 11 is disconnected from the mains power. [. . . ]