User manual KONICA MINOLTA BIZHUB 360

[. . . ] 500/420/360 User Manual Contents 1 Introduction 1. 1 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic Duplex Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the Repeat Interval Setting is specified, the two copy images are positioned equally apart from the center of copy paper, with specified value to be an interval between the two images. ­ ? ? 11 What should be done if wrong value is entered or Input Error message is displayed?% Press [C] (Clear) on the control panel, then reenter the correct value. Touch [OK] to return to the Application Screen. ­ Touch [Cancel] on the Image Repeat Screen, 2/4/8 Repeat Screen, or Repeat Interval Setting Screen to cancel the setting change. 12 13 Select additional copy conditions, as desired. The machine will start printing when ready for output. bizhub 500/420/360 (Phase 3) 6-63 6 2 Note Application Functions To release the selected application function, touch [OFF]. To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Application Screen or Basic Screen. 6-64 bizhub 500/420/360 (Phase 3) Application Functions 6 6. 9 Dividing Spread Image into Right and Left Pages using ADF (Booklet Pagination) Use this function to divide a page spread image scanned from the ADF into two separate images of right and left pages. Function overview To use this function properly, the binding position of the spread original should be specified. Mode Left Bind Description Copies will be made from the left page to the right page. Right Bind Copies will be made from the right page to the left page. bizhub 500/420/360 (Phase 3) 6-65 6 To copy using Booklet Pagination Application Functions 0 Load the original in the ADF. The original size will be detected automatically when loaded in the ADF. 0 Original Direction and Margin settings are ineffective, even if specified. The magnification can be changed as desired. 1 2 3 4 Position the original in the ADF. Load copy paper of size A4 v, B5 v, and 8-1/2" e 11" v in any tray. ­ ­ Touch [Paper] on the Basic Screen to display the Paper Screen. Touch the desired tray key to select the tray loaded with A4 v, B5 v, and 8-1/2" e 11" v paper. 6-66 bizhub 500/420/360 (Phase 3) Application Functions 6 5 Touch [Application] tab on the Basic Screen. The Application Screen will be displayed. 6 Touch [Book Copy/Repeat], then touch [Booklet Pagination]. The Booklet Pagination Screen will be displayed. bizhub 500/420/360 (Phase 3) 6-67 6 7 ­ Application Functions Select the binding position of the spread original. For the spread original to read from the left page to the right page, touch [Left Bind] to highlight it. On the contrary, if the spread original reads from the right page to the left page, touch [Right Bind]. 8 Touch [OK] to return to the Application Screen. ­ Touch [Cancel] on the Booklet Pagination Screen to cancel the setting change. 9 10 Select additional copy conditions, as desired. The machine will start scanning the original, then printing when ready for output. 2 Note To release the selected application function, touch [OFF]. To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Application Screen or Basic Screen. 6-68 bizhub 500/420/360 (Phase 3) Application Functions 6 6. 10 Making Multiple Page Signature Booklet (Booklet) Use this function to arrange the scanned original pages in booklet format in correct order when folded in half. If the machine is equipped with Finisher FS-510 and Saddle stitcher SD-502 options, the finished sets can be half-folded and also stapled in the center. Function overview With Booklet function specified, magnification will be set to e0. 707 automatically. For example, the A4 original will be automatically finished into A4 spread (a booklet of size A5). If A3 spread (a booklet of size A4) is desired, manually select the tray loaded with A3 copy paper. [. . . ] Touch [9 Security Setting], then touch [1 Administrator Password]. The Administrator Password Setting Screen will be displayed. bizhub 500/420/360 (Phase 3) 16-147 16 3 Enter the current password. Utility <Administrator Setting> Password entry is limited to 8 alphanumerical characters. If entered password is wrong or less than 8 characters, an error message will be displayed on touching [OK] and any key on the control/touch panel will be unavailable for the next five seconds. Touch [OK]. ­ ­ ­ 4 5 6 Enter the new password, then touch [OK]. If further changes are required, touch the desired key. 16-148 bizhub 500/420/360 (Phase 3) Utility <Administrator Setting> 3 Administrator Security Level Specify the administrator settings to be allowed to general users. 16 1 2 Follow the procedure described in "How to access the Administrator Setting Screen" on page 16-3 to display the Administrator Setting Screen. [. . . ]