User manual KONICA MINOLTA BIZHUB C200

[. . . ] User's Guide [Enlarge Display Operations] Introduction Thank you for choosing this machine. The bizhub 751/601 User's Guide [Enlarge Display Operations] contains details on the operation of the various functions available in the Enlarge Display mode of the bizhub 751/601 and on the various operating precautions. In order to ensure that this machine is used correctly and efficiently, carefully read the Enlarge Display Mode Operations volume of the User's Guide before using the machine. For descriptions on trademarks and copyrights, refer to [Trademarks/ Copyrights]. [. . . ] For details, consult your service representative. 751/601 2-17 Using copy functions 2 2. 6. 3 Selecting a folding or binding setting 1 In the Basic screen, touch [Finishing]. 2 Touch [Fold/Bind]. ­ To return to the main screen, touch [Main Screen]. The Fold/Bind screen appears. 3 Select the desired settings. 751/601 2-18 Using copy functions 2 ­ To cancel the setting, touch [No]. 4 Touch [OK], and then touch [OK] in the next screen that appears. Otherwise, touch [Main Screen]. The Basic screen appears again. 751/601 2-19 Using copy functions 2 2. 7 Selecting not to rotate the image Copies can be printed with the image not rotated to fit the orientation of the loaded paper. 2 Note Depending on the paper size and zoom ratio, some parts of the image may be lost. Follow the procedure described below to select the setting to not rotate the image. 1 Touch [Auto Rotate OFF]. ­ To cancel the setting for not rotating the image, touch [Auto Rotate OFF] again. 751/601 2-20 Using copy functions 2 2. 8 Selecting the quality of the original Select an original quality setting. Select the setting for the original type to better adjust the copy quality. The following Original Type settings are available. Setting Text Dot Matrix Original Text/Photo Photo Description Select this setting when copying originals containing only text. Select this setting when copying originals containing only text that appears faint (such as that written with a pencil). Select this setting when copying originals containing both text and photos. Select this setting when copying originals containing only photos (halftones). Follow the procedure described below to select an Original Type setting. 1 2 Position the original to be copied. ­ For details on positioning the original, refer to "Feeding the original" on page 1-11. Touch the Original Settings tab. The Original Settings screen appears. 751/601 2-21 Using copy functions 2 3 Touch [Original Type]. The Original Type screen appears. 4 Touch the button for the quality setting most appropriate for the loaded original. ­ To return to the main screen, touch [Main Screen]. 5 Touch [OK]. The Original Settings screen appears again. 751/601 2-22 Using copy functions 2 2. 9 Selecting the density settings Specify the copy density and background density. The following density adjustments are available. Parameter Density Background Removal Description The print image density can be adjusted to one of nine levels. The density of the background color of the original can be adjusted to one of nine levels. Follow the procedures described below to select the density settings. 2. 9. 1 Adjusting the print density (Density settings) 1 Touch [Density/Background] on the Basic screen. The Density/Background screen appears. 2 Touch [Density]. The Density screen appears. 751/601 2-23 Using copy functions 2 3 Select the desired Density setting. ­ Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. ­ To select the center setting (default setting), touch [Standard]. ­ Touch [Auto] to have the machine detect the density of the original image and automatically select the appropriate exposure for the copy. ­ To return to the main screen, touch [Main Screen]. 4 1 Touch [OK], and then touch [OK] in the next screen that appears. The Basic screen appears again. 2. 9. 2 Adjusting the background density (Background Removal settings) Touch [Density/Background] on the Basic screen. The Density/Background screen appears. 751/601 2-24 Using copy functions 2 2 Touch [Background Removal]. The Background Removal screen appears. 3 Select the desired Background Removal setting. ­ Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. ­ To select the center setting (default setting), touch [Standard]. ­ To return to the main screen, touch [Main Screen]. 4 Touch [OK], and then touch [OK] in the next screen that appears. The Basic screen appears again. 751/601 2-25 Using copy functions 2 2. 10 Selecting the Paper settings 2. 10. 1 Selecting a Paper Type setting for the bypass tray If paper other than plain paper, such as OHP transparencies or label sheets, is loaded in the bypass tray, be sure to change the paper type setting as described below. 2 Note A paper type for the other trays than the bypass tray can be selected in the User setting. For details, refer to the User's Guide [Copy Operations]. 2 Reminder If special paper is loaded into the bypass tray, be sure to select the corresponding paper type, otherwise a paper misfeed may occur. 1 In the Basic screen, touch [Paper]. The Paper screen appears. 751/601 2-26 Using copy functions 2 2 Touch the button for the bypass tray, and then touch [Change Settings]. ­ To return to the main screen, touch [Main Screen]. ­ To specify a special paper for any paper tray other than the bypass tray, touch the button for the corresponding paper tray. ­ If a setting for special paper is selected for the bypass tray, that tray is not selected automatically with the "Auto" Paper setting. 3 Touch [Paper Type]. 4 Select the appropriate setting for the type of special paper that is loaded. 751/601 2-27 Using copy functions 2 Touch the button for the desired paper type. ­ To print on thin paper, tab paper, fine paper, recycled paper and label sheets, touch [] or []. ­ [Tab Paper] cannot be selected if "Paper Size" is set to "Standard Size", "Custom Size" or "Wide Paper". 5 Touch [OK], and then touch [OK] in the next two screens that appear. Otherwise, touch [Main Screen]. The Basic screen appears again. 751/601 2-28 Using copy functions 2 2. 10. 2 Selecting a Paper Size setting for the bypass tray The paper size can be set for the bypass tray so that it can be used with the specified paper size. 2 Note For details on loading paper, refer to the User's Guide [Copy Operations]. The paper size can be selected for the bypass tray in any of the following ways. Setting Auto Detect Standard Size Custom Size*1 Wide Paper *1 Description Select this setting to automatically detect the size of the paper loaded into the bypass tray. A standard paper size can be set so that the paper tray is used specifically with the selected paper size. A custom paper size can be set so that the paper tray is used specifically with the selected paper size. [. . . ] In addition, destinations can be removed or their information can be checked. 1 In the Fax/Scan mode screen, touch [Dest. Settings]. The Destination Settings screen appears, and the specified destinations can be checked. 2 Select the desired destination from the list of destinations. ­ To return to the Address Book screen, touch [Main Screen]. 751/601 3-29 Using fax/scan functions 3 3 Touch [Details], and then check the destination details. ­ To delete a destination, select a destination, and then touch [Delete] to display a message requesting confirmation to delete the destination. 4 Touch [Close]. 751/601 3-30 4 Logging on and logging off Logging on and logging off 4 4 4. 1 2 Note Logging on and logging off When a logon screen appears For details, refer to the User's Guide [Copy Operations]. 4. 1. 1 When the screen to enter the user name appears If the message "Enter User Name and password, and then touch [Login] or press the [Access] key. " appears, user authentication settings have been specified on this machine. If user authentication settings have been applied, this machine can only be used by users who enter their user name and password. When the following screen appears, type in the user name and password. [. . . ]