User manual KONICA MINOLTA BIZHUB PRO 2500P

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KONICA MINOLTA BIZHUB PRO 2500P. We hope that this KONICA MINOLTA BIZHUB PRO 2500P user guide will be useful to you.


KONICA MINOLTA BIZHUB PRO 2500P : Download the complete user guide (8027 Ko)

You may also download the following manuals related to this product:

   KONICA MINOLTA BIZHUB PRO 2500P BROCHURE (731 ko)
   KONICA MINOLTA BIZHUB PRO 2500P BROCHURE (1003 ko)

Manual abstract: user guide KONICA MINOLTA BIZHUB PRO 2500P

Detailed instructions for use are in the User's Guide.

[. . . ] User manual bizhub PRO 1600P/2000P/2500P Operating information Copyright Copyright 2006-2008 Océ All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Océ. Océ makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Océ reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes. Edition 2008-07 US Trademarks Trademarks List of trademarks Xerox, DocuTech, DigiPath and FreeFlow are registered trademarks of Xerox Corporation. [. . . ] Press 'Properties'. 80 Chapter 4 Working with the operator panel Change the sorting method Note: You can also press the job 2 times to access the 'Properties' window. Press 'Finishing'. The 'Sort' button shows the currently selected sorting method. 5. Press 'OK'. 81 Change the type of offset stacking Change the type of offset stacking Introduction You can use the function 'Offset stacking' to create a visible distinction between sets or jobs in an output location. When 'Offset stacking' is enabled, each set or job will be stacked with an offset compared to the previous set or job. You can set the default type of offset stacking in the workflow profile on the operator panel (see `Work with the workflow profiles' on page 104). The following table describes when you can change the type of offset stacking for specific jobs. [15] [15] Possibility to change the type of offset stacking per job When Then The type of offset stacking is set to 'Sets You can change the type of offset (as in job)' stacking per job via the 'Properties' window in the 'Jobs' view. The type of offset stacking is set to 'Jobs', 'Sets (always)', 'Banners' or 'Off' You cannot change the type of offset stacking per job. The 'Properties' window displays 'As in system'. This section describes the following: The values you can select in the 'Properties' window when 'Sets (as in job)' is set in the workflow profile How to change the type of offset stacking per job via the 'Properties' window. Types of offset stacking in the 'Properties' window When 'Sets (as in job)' is set in the workflow profile, then you can select one of the following types of offset stacking. 82 Chapter 4 Working with the operator panel Change the type of offset stacking [16] [16] Available types of offset stacking in the 'Properties' window When You select 'Off' You select 'Each set' You select 'As in document' Then All the printed sets are sent to the output location in one straight stack. All the printed sets are sent to the output location with an offset between the sets. All the printed sets are sent to the output location as defined in the job ticket. Illustration [40] [40] Change the type of offset stacking Change the type of offset stacking 1. In the list of 'Waiting jobs' or 'Scheduled jobs', press the job you want to edit. Press 'Properties'. Note: You can also press the job 2 times to access the 'Properties' window. Press 'Finishing'. 83 Change the type of offset stacking The 'Offset stacking' button shows the currently selected type of offset stacking. 5. Press the 'Offset stacking' button. A drop-down list appears. 6. Press 'OK'. 84 Chapter 4 Working with the operator panel Check the first set Check the first set Introduction You can indicate that you want to print 1 set of a job first to check the print quality. When the print quality meets your expectations, you can continue the job. You can use 1 of the following methods to indicate that you want to check the first set. Use a workflow profile where 'Check first set' is enabled (see `Work with the workflow profiles' on page 104). Then the machine always prints 1 set before the entire job is printed. Enable the 'Check first set' function in the 'Properties' option of the 'Jobs' view for a specific job only. However, this only works when the setting 'Check first set' in the workflow profiles is set to 'As in job' (see Work with the workflow profiles on page 104). [. . . ] Errors that relate to the machine Errors that relate to the jobs Toner problems that relate to the use of fiber-rich media. This section gives an overview of the possible errors and the solutions to these errors. Note: Only operators who received the special maintenance training are allowed to replace or clean parts and solve paper jams in the process units. Overview of the possible machine errors [31] [31] Handle the machine errors (1 ­ 2) Error Paper jam Solution Additional information Follow the instructions After you solved the error, the machine on the operator panel. Please check for double prints. Software error Follow the instructions A message on the operator panel will on the operator panel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KONICA MINOLTA BIZHUB PRO 2500P




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KONICA MINOLTA BIZHUB PRO 2500P will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.