User manual KONICA MINOLTA BIZHUB C353P

[. . . ] C353P User Manual . Contents 1 Introduction 1. 1 1. 2 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Trademarks and copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . License information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ­ ­ ­ As prompted, enter the administrator name and password. For the administrator name and password, contact your network administrator. To quit the installation, click the [Cancel] button. 6 7 Click the [Continue] button and follow the on-screen instructions until the Easy Install dialog box appears. When the printer driver is installed for the second and subsequent times, the [Install] button may appear as the [Upgrade] button. This completes the printer driver installation. Next, select a printer. 6-4 bizhub C353P Installing the printer driver for Macintosh 6 6. 2. 2 Selecting and connecting the printer (OS 10. 4) In OS 10. 4, this machine can be connected with Bonjour, AppleTalk, LPR (LPD), or IPP. After specifying the network setting for this machine, selecting this machine as the printer in Printer Setup Utility or Print Center enables printing. Specifying the Bonjour settings for this machine Enable Bonjour in "Bonjour Setting", and then enter the Bonjour name. ! Detail For details on the Bonjour settings of this machine, refer to the "Network settings" on page 4-3. Adding a printer (Bonjour settings) 1 2 Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer Setup Utility" or "Print Center" to open it. ­ ­ ­ If available printers have already been set up, the Add Printer dialog box does not appear. When turning off the power, then on again, wait at least 10 seconds before turning it on again. The connected printers are detected. 3 4 From the "Printer Name" list, select the desired model name and connection (Bonjour). Select "KONICA MINOLTA" in "Print Using", select the desired model from the list of models, and then click the [Add] button. If the selected printer is registered in the printer list, the setting procedure is completed. 2 Note If the Installable Options window appears, proceed to change the option settings as necessary. For details, refer to "Options" on page 8-4. Specifying the AppleTalk settings for this machine Enable AppleTalk in "AppleTalk Setting", and then enter the printer name. ! Detail For details on the AppleTalk settings of this machine, refer to "Network settings" on page 4-3. Specifying the AppleTalk settings for the computer Specify the AppleTalk settings for the Macintosh computer connected to this machine. 1 2 3 4 5 On the "Apple" menu, select "System Preferences". Click the AppleTalk tab, and then select the "Make AppleTalk Active" check box. ­ When the "Apply configuration changes?" message appears, click the [Apply] button. bizhub C353P 6-5 6 Adding a printer (AppleTalk settings) Installing the printer driver for Macintosh 1 2 Select "HDD" - "Applications" - "Utilities" where the driver was installed, and then double-click "Printer Setup Utility" or "Print Center" to open it. ­ ­ ­ If available printers have already been set up, the Add Printer dialog box does not appear. When turning off the power, then on again, wait at least 10 seconds before turning it on again. The connected printers are detected. 3 4 From the "Printer Name" list, select the desired model name and connection (AppleTalk). Select "KONICA MINOLTA" in "Print Using", select the desired model from the list of models, and then click the [Add] button. If the selected printer is registered in the printer list, the setting procedure is completed. 2 Note If the Installable Options window appears, proceed to change the option settings as necessary. For details, refer to "Options" on page 8-4. Specifying the TCP/IP setting for this machine (LPR settings) Specify the IP address of this machine. ! Detail For details on specifying the IP address of this machine, refer to "Network settings" on page 4-3. LPD setting for this machine (LPR settings) To use LPR printing, enable LPD print in the LPD Setting screen of this machine. ! Detail For details on the LPD settings of this machine, refer to "Network settings" on page 4-3. Specifying the TCP/IP setting for the computer (LPR settings) Specify the TCP/IP setting for the Macintosh computer connected to this machine. 1 2 3 4 5 6 On the "Apple" menu, select "System Preferences". Select "Configure" items according to the settings for the network to which the Macintosh computer is connected, and then specify the IP address and subnet mask. [. . . ] In the "NDPS Printer Name" box, enter the "printer name". In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click "Create". Check the printer agent name, and then in the "NDPS Manager Name" box, browse through the NDPS manager names, and register it. In "Gateway Types", select "Novell Printer Gateway", and then register it. [. . . ]