User manual KONICA MINOLTA BIZHUB C650

[. . . ] C451/C550/C650 Box operations Contents 1 Introduction 1. 1 1. 2 1. 3 1. 4 Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If finisher FS-519 is installed, touch [Center Staple/Fold]. 5-10 bizhub C451/C550/C650 Printing a user box document 5 7 If [Fold/Bind] was touched, touch [Yes], and then select the desired folding method. 8 If [Center Staple/Fold] was touched, touch [Yes], and then select the desired folding method. ­ To adjust the position of the center stapling and center fold, touch [Position Adjustment], and then specify an adjustment between -10 and +10. 9 Touch [OK], and then touch [OK] in the next screen that appears. bizhub C451/C550/C650 5-11 5 Adding a binding margin Printing a user box document A binding margin can be added to the left or right side or to the top of the printed pages. Settings can be specified for the following. Parameter Margin Position Description Select the location where the binding margin is to be added. If "Auto" is selected, a binding margin along the long side of the paper is selected if the document length is less than 297 mm. If the document length is more than 297 mm, a binding margin along the short side of the paper is selected. When a binding margin is created, the image can be shifted according to the position of the created binding margin. The image can be shifted between 0. 1 and 250 mm left, right, up or down, depending on the position of the binding margin. If the document is to be printed double-sided, touch [Change Back Shift] to also specify the shift on the back side of the pages. Adjust Value Image Shift 1 In the Print screen, touch [Page Margin]. 2 3 Touch [Yes]. Select the desired position for the binding margin, and then use the keypad to specify the width of the binding margin. ­ ­ The width of the binding margin can be specified in 0. 1 mm increments. To set the binding margin to 0 mm, touch [None]. 5-12 bizhub C451/C550/C650 Printing a user box document 5 4 To move the image according to the binding margin, touch [Image Shift]. The Image Shift screen appears. 5 Touch [OK]. Adding cover pages (Cover sheet) Documents can be printed with cover pages added to the front and back. First, load the paper trays with the paper for the front cover page and the back cover page. Settings can be specified for the following. Parameter Front Cover None Front (Copy) Description Select this setting to add no front cover. Select this setting to print the first page of the document onto the front cover page. If "2-Sided" is selected, the second page of the document is printed on the back of the front cover page. Select this setting to add the front cover page in front of the first page of the document. Select this setting to print the last page of the document onto the back cover page. If "2-Sided" is selected, the last two pages of the document are printed on the back cover page. Select this setting to add the back cover page after the last page of the document. Front (Blank) Back Cover None Back (Copy) Back (Blank) bizhub C451/C550/C650 5-13 5 2 Note Printing a user box document If a setting for the "Cover Sheet" function is to be specified when printing a copied document, either of the following conditions must be met when saving the document in a user box. A Cover Sheet setting is specified. 1 In the Print screen, touch [Sheet/Cover/Chapter Insert]. 2 Touch [Cover Sheet]. 3 Select the desired cover page format. ­ To select the post inserter tray, select "Front (Blank)" or "Back (Blank)". 5-14 bizhub C451/C550/C650 Printing a user box document 5 4 Select the paper trays loaded with the paper for the front and back cover pages. Touch [Paper]. 5 Select the paper tray loaded with the paper for the front or back cover page. 6 Touch [OK], and then touch [OK] in the next screen that appears. bizhub C451/C550/C650 5-15 5 Adding insertions (Insert sheet) Printing a user box document The document can be printed with other paper, such as colored paper, inserted for the specified pages. There are settings ("Copy" and "Blank") for selecting whether or not the inserted pages are printed. [. . . ] If this mode is not specified, the firewall will be considered inaccessible and the connection will be terminated, preventing the file from being sent. Based on the PostScript format, you can use the free Adobe Reader software to view documents. Ability to automatically find and use the appropriate driver when a peripheral device is connected to a computer The number that identifies the transmission port for each process running on a computer on the network. Measuring unit for resolution, particularly for monitors and scanners. [. . . ]