User manual KONICA MINOLTA CM_H2 BROCHURE

[. . . ] Unlike conventional spectrophotometers, there is no need to mechanically switch between SCI and SCE mode. This improves working efficiency and provides stable measured data since the measurement area does not shift when the mode is switched. [. . . ] And also Relativity Gloss Value can be displayed by using Numerical Gloss Control. Light source for specular component Light source for SCI Relativity Gloss Value The LCD specifications are subject to change without prior notice. Powerful partnership between TM CM-2500d and SpectraMagic NX Color Data Software SpectraMagic NX TM (Optional) · SCI is a method in which measurements are taken with the specular reflection included. For this reason, it minimizes influences of the surface condition of a sample, and is especially suitable for color quality control and Computer Color Matching. · SCE is a method in which measurements are taken excluding the specular reflection. This type of measurement provides results similar to those observed visually. Supports Windows®2000/XP Expanded LCD display (64 x 240 dots) Displays large quantities of information (simultaneous display of SCI and SCE data etc. ) High-accuracy sensor For plastics, paints, resins and consumer products High reliability and long life. Maintenance-free design. The number of moving parts in the instrument is minimized through the introduction of numerical control technology. The CM-2500d can be used with confidence, since it has been developed, manufactured and calibrated to meet ISO 9001 requirements. Measures at 10nm intervals for the full wavelength range. Excellent repeatability Illuminated viewfinder Allows measurement in any position. Compact, lightweight, with an easy-to-operate navigation wheel and large LCD display. The battery-powered small, light body allows the instrument to be placed in any position at the sample surface. SpectraMagic NX conforms to FDA 21 CFR Part 11 assuring integrity and reliability of data records. TM TM TM TM · Windows® is a trademark of Microsoft Corporation in the USA and other countries. In various applications For pharmaceuticals, cosmetics, printing, building materials, textiles, food etc. Specifications Illumination/ d/8 (diffuse illumination, 8-degree viewing ), equipped with simultaneous viewing system measurement of SCI (specular component included)/SCE(specular component excluded) Conforms to CIE No. 15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7 and JIS Z8722 Condition C standard. Sphere Size ø52mm Light-receiving element Silicon photodiode array (dual 40 elements) Spectral separation device Diffraction grating Wavelength range 360nm to 740nm Wavelength pitch 10nm Half bandwidth Approx. 10nm Reflectance range 0 to 175%, resolution: 0. 01% Light source 2 pulsed xenon lamps Measurement time Approx. 2 seconds for fluorescent measurement) Minimum interval 3 seconds for SCI/SCE (4 seconds for fluorescent measurement) between measurements Battery perfomance Alkaline manganese:approx. 1000 measurements Measurement/ MAV: ø8mm/ø11mm illumination area Repeatability Spectral Reflectance:Standard deviation within 0. 1% (360 to 380nm within 0. 2%) Colorimetric Value : Standard deviation within E*ab 0. 04(Measurement conditions:White calibration plate measured 30 times at 10-second intervals after white calibration was performed) Inter instrument within E*ab 0. 2 (MAV/SCI) Average for 12BCRA Series II color agreement tiles compared to values measured with master body. Measurement Single measurement/automatic averaging of multiple measurements mode (auto mode: 3, 5, 8 times/manual mode) Interface RS-232C standard Observer 2/10 degrees (CIE 1931/2°, CIE 1964/10°) Illuminant A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources) Display data Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result Color space/ L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, colorimetric data XYZ, MI, WI (ASTM E313), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T, WI/Tint (CIE/Ganz), CIE00 Data memory 1700 pieces of data (as SCI/SCE 1 data) * 700 pieces of data in the " defined in COND. " mode. * Total of the sample data for the COND and TASK modes and color difference target data Tolerance Display Tolerance for color difference (both box and eliptical tolerances can be set) Power source 4 AA-size battery or AC adapter Size (WxHxD) 69 x 96 x 193mm Weight Approx. [. . . ] Measurement Single measurement/automatic averaging of multiple measurements mode (auto mode: 3, 5, 8 times/manual mode) Interface RS-232C standard Observer 2/10 degrees (CIE 1931/2°, CIE 1964/10°) Illuminant A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources) Display data Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result Color space/ L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, colorimetric data XYZ, MI, WI (ASTM E313), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T, WI/Tint (CIE/Ganz), CIE00 Data memory 1700 pieces of data (as SCI/SCE 1 data) * 700 pieces of data in the " defined in COND. " mode. * Total of the sample data for the COND and TASK modes and color difference target data Tolerance Display Tolerance for color difference (both box and eliptical tolerances can be set) Power source 4 AA-size battery or AC adapter Size (WxHxD) 69 x 96 x 193mm Weight Approx. [. . . ]