User manual KONICA MINOLTA CM-SA BROCHURE

[. . . ] Skin Analysis Software NEW CM-SA For quantitative evaluation & analysis of skin color and pigmentation Simultaneous Measurement of Skin Color and Melanin Index Used in combination with a Konica Minolta spectrophotometer, the CM-SA enables highly accurate measurement of skin color simultaneously with a numerical display of the Melanin Index, Hb (Hemoglobin) Index, and Hb SO2 (Hemoglobin oxygen saturation) Index (%). For applications in the R&D divisions of cosmetic, functional food, and pharmaceutical companies developing products with "skinlightening" effects, commissioned clinical testing organizations, and research institutes for dermatology, plastic surgery, etc. Realizing Simultaneous Measurement of Skin Color and Melanin Index! In the field of skin research and development, there is an increasing demand to measure the color and pigmentation of skin as it provides valuable information on a number of factors. For example, where cosmetics are concerned companies are aiming to make products that more closely match or complement the skin tone of clients. [. . . ] When a preset number of measurements is reached, the next measurement data can be linked to the next group. (Useful for consecutive measurements on a number of examinees) Example When there are Examinees 1, 2, and 3, and the number of measurements is set to 3, the group is automatically changed to the next one every three measurements, and the data is linked to the relevant group (examinee). --------- After three measurements are completed, the group is automatically switched to the next group to store the data for the fourth measurement. Output of measured data in CSV text format The measurement results can be output in CSV text format to be utilized for further analysis or data management using Excel® or other spreadsheet applications. <Major specifications of CM-SA> Skin data display Colorimetric value display Graph display Data handling Melanin Index Hb Index [Total hemoglobin (oxidized + reduced) index] Hb SO2 Index (%) [Hemoglobin oxygen saturation index (%)] L*, a*, b*, Munsell value (Hue, Value, Chroma)*1 Hue­Value Graph, Hb Index­Melanin Index Graph Saving/reading data in CM-SA original format Saving data in text (CSV) format [Melanin Index, Hb Index, Hb SO2 Index (%), L*, a*, b*, Munsell value (Hue, Value, Chroma), Spectral reflectance (400-700 nm)*2] *1 Munsell data are calculated for 2° observer and Standard Illuminant C. *2 The spectral reflectance data that are output are the reflectance obtained in SCI (specular component included) mode. <PC operating environment> OS CPU Memory Hard disk Display Other Windows® Vista Business SP1(32-bit), Windows® XP Professional SP2, Windows® 2000 Professional SP4 Pentium® III 600 MHz or equivalent (recommended) 128 MB or more (256 MB or more is recommended) 100 MB or more free disk space is required. Display capable of displaying 1024 × 768 pixels or above/16-bit color or above CD-ROM drive (required for software installation), USB port or serial port (required for connecting the PC with the instrument) * Some instrument functions not available when using instrument with CM-SA. <Main specifications of compatible spectrophotometers> Model Wavelength range Wavelength pitch Light source Measurement time Minimum measurement interval Battery performance (max. measurement count) Measurement/ illumination area CM-700d 400 nm to 700 nm 10 nm Pulsed xenon lamp (with UV cut filter) Approx. 2 seconds for SCI or SCE measurement CM-600d CM-2600d 360 nm to 740 nm Pulsed xenon lamp Approx. 2 seconds for fluorescent measurement) 3 seconds for SCI/SCE measurement (4 seconds for fluorescent measurement) CM-2500d Approx. 2, 000 measurements with fully charged nickel-metalhydride rechargeable batteries (2300 mAh) * Continuous measurements at 10-second intervals at 23ºC (single measurement fixed at SCI or SCE) Approx. 1, 000 measurements with alkaline dry batteries * Continuous measurements at 10-second intervals at 23ºC MAV : Ø8 mm/ Ø11 mm SAV : Ø3 mm/ Ø6 mm * Changeable by replacing target mask and selecting lens position MAV : Ø8 mm/ Ø11 mm only MAV : Ø8 mm/ Ø11 mm SAV : Ø3 mm/ Ø6 mm * Changeable by replacing target mask and selecting lens position MAV : Ø8 mm/ Ø11 mm only Repeatability Inter-instrument agreement No. of averaging measurements Interface Power Size Weight Spectral reflectance: Standard deviation within 0. 1% Colorimetric value: Standard deviation within E*ab 0. 04 * When a white calibration plate is measured 30 times at 10-second intervals after white calibration Spectral reflectance: Standard deviation within 0. 1% (standard deviation within 0. 2% for the wavelength range of 360 to 380 nm) Colorimetric value: Standard deviation within E*ab 0. 04 * When a white calibration plate is measured 30 times at 10-second intervals after white calibration Within E*ab 0. 2 (MAV/SCI) *Average of 12-color measurement with the BCRA Series II compared to values measured with a master body at 23ºC 1 to 10 measurements (automatic averaging); 1/3/5/8 measurements (automatic averaging); 1 to 30 measurements (manual averaging) 1 to 30 measurements (manual averaging) USB1. 1 and Bluetooth® standard version 1. 2* RS-232C-compliant 4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries; Special AC adapter 73 (W) × 211. 5 (H) × 107 (D) mm 69 (W) × 96 (H) × 193 (D) mm Approx. [. . . ] · Pentium®isatrademarkorregisteredtrademarkofIntelCorporationintheU. S. A. andothercountries. · Specificationsshownherearesubjecttochangewithoutnotice. SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. Certificate No : YKA 0937154 Registration Date : March 3, 1995 Certificate No : JQA-E-80027 Registration Date : March 12, 1997 ©2008 KONICA MINOLTA SENSING, INC. 9242-4893-20 AIHA*K [. . . ]