User manual KONICA MINOLTA DIMAGE 7D

[. . . ] E F S POCKET REFERENCE GUIDE GUIDE DE RÉFÉRENCE DE POCHE GUÍA DE REFERENCIA DE BOLSILLO Important Note For Windows 98/98SE: · The Windows 98/98SE driver software supplied with the product must be installed before initially connecting the camera to the computer. All later Windows versions and Mac OS: · No special driver is required to access the camera from the computer. Note importante Avec Windows 98/98SE : · Le pilote Windows 98/98SE fourni avec l'appareil doit être installé avant de connecter l'appareil au micro-ordinateur. Toutes autres versions Windows et Mac OS : · Aucun pilote n'est nécessaire pour accéder à l'appareil depuis le micro-ordinateur. ©2004 Konica Minolta Photo Imaging, Inc. under the Berne Convention and the Universal Copyright Convention. Nota Importante Para Windows 98 / 98SE: · El software controlador de Windows 98 / 98SE proporcionado con el producto se debe instalar antes de conectar por primera vez la cámara al ordenador. [. . . ] Recording A-11 A-10 Recording COLOR MODES E MENU > 1 > Color mode > Select option* > ·:enter > MENU *(Natural: sRGB. . . natural color reproduction for most purposes. Embed Adobe RGB. . . similar to Natural Color, but uses the extended gamut of the Adobe RGB color space and is embed ded in the image file. ) (p. 60-62) Auto white balance is used when the white-balance dial is set to AWB. Custom white-balance: to calibrate the camera to a specific lighting condition. Color temperature: to set the white balance to a specific color temperature. RECORDING DIGITAL FX (p. 60) MENU > 1 > Digital FX > Enter > ·:enter > select the parameter with the up/down keys > change the parameter with left/right keys > ·:enter > MENU Contrast Saturation Sharpness Hue : : : : Decrease Subdues colors Softens details Shifts color space ­ ­ ­ ­ . . . + + + + Increase Accentuates colors Accentuates details Shifts color space Preset white balance CAMERA-SENSITIVITY(ISO) SETTING (p. Turn the white-balance dial to the preset white balance position, and press the white-balance button. Turn the front control dial to select the preset white balance and turn the rear control dial to adjust the selected preset white balance. Press the central button to complete the operation. :sel. :adj. :enter Sensitivity Seven settings can be selected for camera sensitivity (ISO); Auto, 100, 200, 400, 800, 1600, and 3200. · The higher the ISO setting, the higher the sensitivity and the longer the flash range, but noise is increased at the same time. Custom white-balance calibration (p. Turn the white-balance dial to the custom white balance position, and press the white-balance button. 2. Use the control dials to select "Set", and press the central button. Place a white object in the spot-metering area and press the shutter-release button to calibrate in camera. Custom white balance 1. Press the camera-sensitivity (ISO) button. :select :enter :select :enter 2. · Zone matching can be activated in "ISO button set" in custom section 4. Use the control dials or left/right keys to select the white-balance register, 1, 2 or 3. Press the central button to complete the operation. (Continued on the next page. ) Recording A-13 Color temperature setting (p. Turn the white-balance dial to the color temperature position, and press the white-balance button. Use the control dials to set the color temperature. Color temperature : select : save 3. · All setting in the selected register are replaced with the new settings. RECORDING · The front dial adjust the temperature in thousands and the rear in hundreds. 3. Press the central button to complete the operation. :adjust :enter Recall memory While pressing the dial release, turn the exposure-mode dial to the appropriate memory register, 1, 2, or 3. MEMORY (p. [. . . ] The data can then be deleted from the card so more images can be recorded. 1. MENU > 1 > Transfer mode > Data storage > ·:enter > MENU 2. Repeat the previous steps for all images to be printed, and press the central button. TRANSFER 5. When the camera is properly connected to the computer, a drive icon, or volume, appears in My Computer or on the Desktop. Windows 2000: :move :sel. No. [. . . ]